Potential divider rearrangement in textbook example

2 replies · 2K views · last reply
illy
Messages
1
Reaction score
0
Circuit schematic of a potential divider: +15 V supply at top, resistor R1 in series with resistor R2 to ground, with Vout taken from the junction between them.
Photo of a printed textbook page under the heading 1. Observations. It shows R2/(R1 + R2) * 15 = 4.9, then says which can be rewritten as R1 = (4.9/10.1) * R2, followed by text about needing more constraints.
Hi,

I am just going through a textbook on electronics and have come across an explanation that uses potential dividers to work out potential values for resistors. I was wondering if anyone is able to explain how the author got the bit after "which can be written as": R1=(4.9/10.1)*R2

How did he rearrange it to get this? Any help would be appreciated. Thank you! (I have added the pictures from the textbook.)
 
The same current flows through R1 as R2. The voltage across R1+R2 = 15V
The voltage Vout across R2 = 4.9V
So voltage across R1 = 15V – 4.9V = 10.1V
The ratios R1 / R2 = 10.1V / 4.9V

Therefore R1 = ( 10.1 / 4.9 ) * R2
So maybe the second equation cannot be rewritten as R1 = ( 4.9 / 10.1 ) * R2
 
illy said:
How did he rearrange it to get this?

That's algebra not electronics

Handwritten equation: R2/(R1 + R2) * 15 = 4.9


solve for R1 ?

There are several paths to get there
i would

1. divide both sides by 4.9
2. multiply both sides by (R1 + R2)
3. subtract from both sides R2

and when you do that you'll find author's mistake