Series and Parallel RLC parameters

2 replies · 3K views · last reply
baby_1
Messages
159
Reaction score
16

Homework Statement


I want to find different parameters of series and parallel RLC
for series RLC we have this transfer function
Transfer function H(s) equals s/C divided by s squared plus s/(RC) plus 1/(LC).

and we know that transfer function of second order system is something like this:we can assume H0=1
Transfer function H(s) equals H0 times (omega0 over Q) times s, divided by s squared plus (omega0 over Q) times s plus omega0 squared, labelled equation (1).

but
Handwritten equation: 1/C = ω0/Q, which implies Q = Cω0.
is wrong(when you use only denominator you find out that
Handwritten equation Q = Cω₀R.
).However the same approach works fine for parallel RLC.

what is my mistake?

Homework Equations

The Attempt at a Solution

 
For a series RLC, from the denominator I find ## Q=\omega_o\frac L R##

What is your transfer function for the series circuit?
 
Hi,
Sorry , I mean that this approach works for Series RLC but not works for parallel RLC
Here is my calculation
Circuit schematic of a parallel RLC circuit driven by a current source i(t), with resistor R, inductor L and capacitor C in parallel, branch currents i_R, i_L and i_C, and voltage v(t) across the capacitor.

we know that
Equation H(s) = V_o / i_s = Z(s), where H(s) is the transfer function, V_o is the output voltage, i_s is the source current and Z(s) is the impedance.


Equation: Com = L||C = (Ls * 1/Cs) / (Ls + 1/Cs) = Ls / (LCs^2 + 1)


Equation: R||Com = (Ls/(LCs^2+1) * R) / (Ls/(LCs^2+1) + R) = LRs / (Ls + R + RLCs^2) = (LR/(RLC)) (s / (s^2 + s/(RC) + 1/(LC))) = (1/C)(s / (s^2 + s/(RC) + 1/(LC)))


So in deliminator
Handwritten expression Q = Cω₀R, with Q on the left and Cω₀R on the right.
, but with numerator it is different

The same approach