Spice and B2 Spice Circuit Schematics Question

1 reply · 4K views · last reply
Cyborg101
Messages
2
Reaction score
0
Hello all,

I'm completely new to Spice and B2 Spice. I'm analyzing the following circuit components from a circuit which as already been constructed and I'm at a loss as to what some of the connections mean.

In the first picture, I am not sure what type of connection is being made at OSC and at +OSCHI.

In the second picture, I am not sure what OS1 and OS2 are connecting to. The third picture simply shows the same component but in B2 Spice.

Thanks,

Cyborg101
 
Attachments
  • Circuit schematic symbol with a red label +OSC at the top left and a red label +OSCHI at the right, attached to a purple vertical line with a horizontal stub and a chevron-shaped connector.
    OSC_and_OSCHI_Symbols.JPG
    3.3 KB · Views: 602
  • Schematic symbol of a uA741 op-amp in a Spice-style editor, with pins 2 and 3 as inputs, output pin 6, VEE at top and VCC at bottom, and offset null pins OS1 and OS2.
    UA741.JPG
    4.4 KB · Views: 533
  • Circuit schematic of an op-amp symbol labelled X1 with pins numbered 1, 2, 3, 8 and 12, 13, with +5V and -5V supply connections at top and bottom.
    X1_B2_Spice.JPG
    4 KB · Views: 597
Pins 1 and 5 on a 741 are offset null connections.

They are connected like this:
Schematic of an LM741 op-amp symbol with its offset null pins connected through a 10 kΩ potentiometer, wiper tied to V- with an arrow pointing to the wiper.


They allow you to produce zero output for zero input which may not otherwise happen due to minor differences in manufacturing.

Not sure about the OSC connections. Some chips like the 74HC4060 have an oscillator gate which can be used as an oscillator or just as an input for an external oscillator. It may be something like that.