I The science behind getting stuck in mud

AI Thread Summary
The difficulty in removing the boot from the mud is primarily due to suction, which occurs when the mud creates a seal around the boot, increasing the pressure needed to displace it. This phenomenon relates to principles of displacement and air pressure, similar to how a sink plunger works. The surface area of the boot's footprint also contributes to the force required to pull it free. Understanding these concepts can provide insight into the mechanics of suction in muddy environments. Exploring topics related to fluid dynamics and pressure can yield more information on this phenomenon.
Lightsyn
Messages
3
Reaction score
0
Hey guys ! :)
Last week I went on a Trip to this place 3500 ft above sea level, as I was walking my rubber boots got stuck on a big pile of mud (almost 30 to 40 cm) of my boots. I managed to take one out but the other was so stuck I had to play the natives to help me get it out.
So my question is, why was it hard to take it out?
What is that phenomena called?
Under what topic can I get more info about it?
Greets ^^
 
Physics news on Phys.org
That is certainly an unusual physícs question. I think the name of the phenomonon is suction. Can you figure out the rest yourself?
 
it is an issue of displacement and pressure, all things must be equal.
 
It's probably not this simple but... compare your boot with a sink plunger or large rubber sucker. What holds those in place is air pressure. I the case of your boot the mud forms a pretty good seal around it. Have a think about air pressure and the surface area of your footprint.
 
Thread 'Gauss' law seems to imply instantaneous electric field propagation'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Dear all, in an encounter of an infamous claim by Gerlich and Tscheuschner that the Greenhouse effect is inconsistent with the 2nd law of thermodynamics I came to a simple thought experiment which I wanted to share with you to check my understanding and brush up my knowledge. The thought experiment I tried to calculate through is as follows. I have a sphere (1) with radius ##r##, acting like a black body at a temperature of exactly ##T_1 = 500 K##. With Stefan-Boltzmann you can calculate...
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (First part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8 and stuck at some statements. It's little bit confused. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. Solution : The surface bound charge on the ##xy## plane is of opposite sign to ##q##, so the force will be...

Similar threads

Back
Top