Two cars meeting - acceleration?

  • Thread starter Thread starter Caitlin.Lolz.
  • Start date Start date
  • Tags Tags
    Acceleration Cars
AI Thread Summary
A car traveling at a constant speed of 30 m/s must be matched by a second car entering from a ramp, which starts from rest and accelerates. The distance to the next exit is 2.8 km, and the first car's speed is maintained throughout. The initial calculations suggested an acceleration of 0.161 m/s², but this was determined to be incorrect. To meet at the exit, the second car must achieve an average speed equal to the first car's speed, necessitating a final speed of 60 m/s instead. Correcting the acceleration calculation is essential for the second car to catch up.
Caitlin.Lolz.
Messages
6
Reaction score
0
A car is traveling at a constant speed of 30 m/s on a highway. At the instant this car passes an entrance ramp, a second car enters the highway from the ramp. The second car starts from rest and has a constant acceleration. What acceleration must it maintain, so that the two cars meet for the first time at the next exit, which is 2.8 km away?

I have tried this problem many different ways and keep on coming up with .161 m/s^2. I made sure to convert the km to m, but the answer is still wrong!

If anyone can help me see what I am doing wrong, that would be great!
 
Physics news on Phys.org
Hi Caitlin.Lolz.,

Caitlin.Lolz. said:
A car is traveling at a constant speed of 30 m/s on a highway. At the instant this car passes an entrance ramp, a second car enters the highway from the ramp. The second car starts from rest and has a constant acceleration. What acceleration must it maintain, so that the two cars meet for the first time at the next exit, which is 2.8 km away?

I have tried this problem many different ways and keep on coming up with .161 m/s^2. I made sure to convert the km to m, but the answer is still wrong!

If anyone can help me see what I am doing wrong, that would be great!

How did you come up with that answer? What was your procedure, what equations did you use, and what numbers did you use in the equations?
 
If you want a helper to see what you are doing wrong, it's a good idea to post your work.

How long did you find that it takes for the two cars to meet up? What is the kinematic equation you set up to describe the distance covered by the car starting at rest at the ramp?
 
the work I did was:

Vo = 0 m/s
d = 2.8 km (or 2800 m)
V = 30 m/s

d=.5(Vo+V)t
2800 = .5 (0 + 30) t
t = 186.67 seconds

d= Vo + .5 at^2
2800 = 0 + .5 (186.67)^2a
a = .161 m/s^2
 
Caitlin.Lolz. said:
the work I did was:

Vo = 0 m/s
d = 2.8 km (or 2800 m)
V = 30 m/s

d=.5(Vo+V)t
2800 = .5 (0 + 30) t
t = 186.67 seconds

d= Vo + .5 at^2
2800 = 0 + .5 (186.67)^2a
a = .161 m/s^2

If the car starting from rest is going to catch the moving car by the next exit, then how much time does it have to do that?

Isn't it the distance to the next exit divided by the constant speed of the moving car and not the average speed of the car accelerating from rest?

Or put another way the average speed of the car starting at rest must be the speed of the car initially in motion. It must average the same speed (30m/s). To do that it's final speed will need to be 60m/s, not the 30m/s that you used.
 
Last edited:
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top