What is the diameter of the bicycle tire?

AI Thread Summary
To determine the diameter of a bicycle tire, the relationship between angular speed and linear speed is used, with the equations v = rw and w = v/r. Given an angular speed of 30 radians/s and a linear speed of 10 m/s, the radius can be calculated by rearranging the equations. The correct calculation yields a radius of 0.33 meters, resulting in a diameter of 0.66 meters or 66 cm. The discussion emphasizes the importance of correctly manipulating equations to avoid confusion in solving for the desired variable. The final conclusion confirms the calculated diameter based on the provided speeds.
keithcuda
Messages
43
Reaction score
0

Homework Statement


A bicycle tire rotates at 30 radians/s. If the bicyclist travels at 10 m/s, what is the diameter of the tire?

Homework Equations


I found; for angular speed, w=v/r
and for linear speed; v=rw
where v=m/s
and w=radians/s

So if i am thinking correctly, i already know my angular speed of 30 radians/s
and my linear speed is 10m/s
so now i just need to find the radius or diameter of the tire.

If i try solving for r, i get completely different answers.

The Attempt at a Solution


bike tire.jpg
 
Physics news on Phys.org
How did you get the 300 in your first solution? Remember what you're solving for, and that you have to treat both sides of an equation the same way.
 
Bystander said:
How did you get the 300 in your first solution? Remember what you're solving for, and that you have to treat both sides of an equation the same way.
good question... It's been a long day here at the power plant.

I always tend to get confused when i try to solve for certain things. i was wanting to solve for "r" by multiplying both sides by 10.

so now i am getting; 30rad/s = 10m/s / r
r=10/30
r=.33

so that is just a radius. The diameter would be .66 meters? or 66cm...?
 
You got that for the second solution, and now for the first solution. That's what I get. And, that should be the diameter.
 
  • Like
Likes keithcuda
Bystander said:
You got that for the second solution, and now for the first solution. That's what I get. And, that should be the diameter.
It makes much more sense when I solve for "r" the proper way... :wThanks for the help
Cheers
Keith
 
Have a happy.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...

Similar threads

Replies
1
Views
3K
Replies
2
Views
1K
Replies
2
Views
6K
Replies
3
Views
2K
Replies
5
Views
7K
Replies
1
Views
3K
Back
Top