Why divide dynamic temperature by 1000 in stagnation pressure calculation

1 reply · 2K views · last reply
Sunrise
Messages
1
Reaction score
0
So this is the question I am working on as shown in the attachment.
I got stuck in the part that I highlighted, where they divided the Dynamic temperature by 1000.
WHY ?

Any help will be appreciated,

Thank you.
 
Attachments
  • Textbook page showing Example 17-1 with the stagnation temperature T01 = T1 + V1^2/(2cp) = 255.7 K + (250 m/s)^2/(2)(1.005 kJ/kg K) x (1 kJ/kg / 1000 m^2/s^2) = 286.8 K, with the factor 1 kJ/kg / 1000 m^2/s^2 highlighted, followed by P01 = P1(T01/T1)^(k/(k-1)) = 80.77 kPa.
    Screen Shot 2014-05-14 at 2.20.57 PM.png
    58.9 KB · Views: 577
Sunrise said:
So this is the question I am working on as shown in the attachment.
I got stuck in the part that I highlighted, where they divided the Dynamic temperature by 1000.
WHY ?

Any help will be appreciated,

Thank you.

It's not that the dynamic temperature is divided by 1000. (Notice: there are units attached to the 1000). You have to convert 1 kJ (= 1000 kg-m[itex]^{2}[/itex]/s[itex]^{2}[/itex]) into its equivalent base units so that you can calculate the rise in temperature due to the velocity of the air.