Why is Half a Wavelength the First Harmonic in Standing Wave Harmonics?

AI Thread Summary
The first harmonic in standing wave harmonics is defined as half a wavelength because it represents the simplest form of a standing wave, formed by two half waves traveling in opposite directions. The relationship between wave speed, frequency, and wavelength is expressed by the equation v = fλ. In this context, the wavelength is considered the length of one complete cycle of the wave, which is twice the length of the standing wave. Thus, for a standing wave of length L, the wavelength λ is equal to 2L, leading to the conclusion that L = ½λ. Understanding this concept is crucial for grasping the fundamentals of wave behavior in physics.
elliottmarter
Messages
13
Reaction score
0
Why does half a wave length and not a full wave length constitute the first harmonic?



v=\lambdaf



because a standing waves can be made with two half waves traveling in opposite directions?
 
Physics news on Phys.org
Here is a good resource on http://www.physicsclassroom.com/Class/waves/U10L4e.cfm" .

Basically you are right, but your terminology isn't quite correct. The wavelength is the length up and back the string, so \lambda=2L\rightarrow L=\frac{1}{2}\lambda.
 
Last edited by a moderator:
Thanks a lot, that helped :smile:
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top