Windmill pumping water from well at given flow rate

[cgt32]

can canyone here help me with this physics problem:
Air moving at 11.0 m/s in a steady winds encounters a windmill of diameter 2.3m and having an efficiency of 27.5 %. The energy generated by the windmill is used to pump water from a well 32.5m deep into a tank 2.30m above the ground. At what rate in liters per minute can water be pumped into the tank?

This is what I have so far:
Ekin = 1/2mv^2
Density for air is: 1.29 kg/m^3
The time for this energy to form is 1 sec.
m = ( a * v * A ) ... where A is air density and v is velocity, a in this case is area of the windmill, which is pi(diameter/2)^2

Thus
Ekin = 1/2 (a * v * A)

So :
Ekin * 25% = energy generated by the windmill

After that, I'm lost. But I think it has to do something with potential energy.

 

[krab]

Originally posted by cgt32

This is what I have so far:
Ekin = 1/2mv^2
Density for air is: 1.29 kg/m^3
The time for this energy to form is 1 sec.
m = ( a * v * A ) ... where A is air density and v is velocity, a in this case is area of the windmill, which is pi(diameter/2)^2

Thus
Ekin = 1/2 (a * v * A)

That should be v^3

Originally posted by cgt32

So :
Ekin * 25% = energy generated by the windmill

After that, I'm lost. But I think it has to do something with potential energy.

The energy needed to raise mass m a height h is mgh where g is acceleration of gravity (9.8 m/sec/sec). This should give you enough info to do the problem.