What is the unit cell and coordinates for wurtzite crystal structure?

AI Thread Summary
The discussion centers on the wurtzite crystal structure, characterized by its ABABAB stacking sequence. A key point raised is the confusion surrounding the unit cell of wurtzite, which is defined as the smallest repetitive unit that specifies the positions of different atoms. It was noted that while only two atoms need to be specified in the asymmetric unit, the unit cell encompasses more atoms due to the application of symmetrical operations. This distinction clarifies why not all atom positions are listed in the unit cell description. Additionally, the coordinates (x,y,z) are confirmed to represent positions in relation to the unit vectors of the hexagonal lattice, denoted as x*a1, y*a2, z*a3.
aaaa202
Messages
1,144
Reaction score
2
As far as I understand wurtzite is the name given to the crystal structure defined by the stacking sequence ABABABAB..
However, I am having a hard time understanding what the unit cell is of wurtzite. From what I know the unit cell is the smallest repetitive unit and in it you specify the position of the different atoms. So I looked up something about wurtzite and found that data:
http://som.web.cmu.edu/structures/S014-ZnO.html
And according to this you only need to specify the position of two atoms, while the unit cells seems to encapsulate a lot more atoms - why are the positions of these not specified?
And another question: The meaning of the coordinates (x,y,z) is x*a1,y*a2,z*a3, where a1,a2,a3 are the unit vectors of the hexagonal lattice - right?
Thanks for taking your time
 
Chemistry news on Phys.org
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top