Register to reply

Designing a headphone with customizable functions

Share this thread:
Feb2-14, 01:31 AM
P: 1
Hey guys, I have a question
I am currently doing a project, which pretty much I've wanted to design a headphone with some customizable functions. I've posted a picture, just to help you guys picture more or less what I wanted to do (but it's not the actual design at all)

What I wanted to do is to have multiple customizable functions:

1 - To display the album cover of the music that I am listening to in a screen located on the headphone. If possible, with led lights that would change accordingly to the album cover colors (i.e. just like itunes interface changes color depending of the album you are listening)
2 - Or to display the music frequency
3 - Or simply display the name of the music that you are listening
4 - Or, if you turn it off, it will only display the logo of the headphone on the sides

* I also want to keep in mind that I wanted to show in a "round" shape display, so I'd need to program to turn off the sides of the screen (i.e. nest thermostat)

So, my question is how can (should) I get started? Haha... is it too unrealistic? Too hard to program? Too much wires to fit into my headphone? (I can sacrifice the led aspect btw)

In addition, can someone tell me what do I need to buy? What kind of led/lcd screen should I buy? What kind of wires etc? Because, I could buy it everything first and then look for help to a person to help program it.

Apologize for my bad grammar, and probably for a lot of dumb questions. Sigh.
Attached Thumbnails
Screen Shot 2014-02-02 at 2.26.37 AM.png  
Phys.Org News Partner Engineering news on
A spray-on light show on four wheels: Darkside Scientific
Research project on accident-avoiding vehicle concluded
Smaller artificial magnetic conductors allow for more compact antenna hardware
Feb2-14, 09:55 PM
P: 245
It's very ambitious but not impossible. All the hardware you need is avaiable for purchase. You can get a small lcd and a processor. Putting it together and making it small will be hard. Without a doubt you'll have to do some PCB designing to make something that fits into a headphone.

PCB's are not impossible. I've taught myself to do it and have made some successful projects. Eagle CAD and DesignSpark are two free programs that you can use to make gerber files for PCB's. You can get good quality low cost (<$30 for ten) custom PCB's from Itead Studio in Hong Kong.

The hardware side is going to be hard enough but the programming is going to be the bullwark of your project. How do you intend to get artist and album info from the songs? Is this a bluetooth device or does it plug into an audio jack? Is it going to interface somehow with popular libraries like Itunes or Zune?

You may want to start with a simple development board. They make boards that can interface with LCD screeens, audio jacks, bluetooth, and so on. The dev board will be much too big for your headphone but it will serve as a platform to test your software. You can study the board to learn how to implement the hardware too.
Feb3-14, 01:52 AM
P: 1,084
Ambitious project.

Doing this with the 3.5mm jack is difficult. It supplies no power (so you need batteries) and it has no data path (so you need a USB, Serial, or bluetooth data path)

For a 1-connector solution you would need to build a USB sound card with bulk data capability. I'd start by understanding the IC's that make a USB sound card possible. Sound cards follow the USB Audio specification, so the basic features require no drivers. But you would need a custom driver and processor to handle the data and display.

Chips like the can handle the data, but then you have to build a USB audio system (not simple) (there are other USB processor chips, like the cypress FX2, etc)

Chips like the can do the Audio, but not the data.

There are chips that do both, but I don't think they are readily available (like the cmedia CM6571) and certainly not trivial to program.

Feb3-14, 03:24 PM
P: 1,084
Designing a headphone with customizable functions

Turns out you can receive the data you want over the USB HID interface. The trick is to find a processor with USB audio interface that can access the HID data and control a display. If you are interested in this method, I can look into it a bit.

Doing what you want in a viable way is not trivial. That's why there are not a bunch of these devices on the market. Over the next couple years, as digital audio headphones become a reality, you will see these sorts of features.

Register to reply

Related Discussions
Headphone wires... General Discussion 16
Headphone Audio System General Discussion 6
Headphone Impedance Electrical Engineering 3
Headphone connections Electrical Engineering 6
Headphone socket Electrical Engineering 6