Giant nuclear powered combustion engine

In summary: I am not sure why it was resurrected.In summary, the idea of a nuclear-powered piston engine has been proposed in the realm of fiction, but it is not currently feasible due to the challenges of containing and utilizing the energy from a nuclear explosion. However, there have been designs for nuclear-powered turbines, and it is theoretically possible to create a nuclear-powered reciprocating power plant. The challenges lie in finding a way to control and harness the energy efficiently. Project Orion, a concept for a nuclear-powered spacecraft, utilized a pusher plate and oil to minimize the effects of ablation from nuclear explosions. However, the idea of a nuclear-powered piston engine remains a theoretical concept and has not been successfully implemented.
  • #1
Antiphon
1,686
4
Has enyone (in the realm of fiction even) proposed making an enourmous
piston engine that would use nuclear weapons instead of atomized
hydrocarbons? (Sure, it would have to be BIG. But its possible, no?)
 
Last edited:
Engineering news on Phys.org
  • #2
You could consider Project ORION a nuclear-piston engine, without the engine-proper. :tongue:
 
  • #3
Antiphon said:
Has enyone (in the realm of fiction even) proposed making an enourmous
piston engine that would use nuclear weapons instead of atomized
hydrocarbons? (Sure, it would have to be BIG. But its possible, no?)

Antiphon,

With the exception of Project ORION - in which a spacecraft is propelled
by ejecting a nuclear weapon and when the weapon exploded some distance
away and some momentum recovered by a big "pusher plate" - I would say
that a nuclear piston engine is NOT possible.

The problem is that any nuclear explosion; even the smallest that we could
ever make; is much too large and hot to contain with any kind of piston
and cylinder as in an engine.

In ORION, one only recovers a portion of the energy - which saves the ship.

The "first wall" of any type of piston engine is going to be vaporized
when it sees the nuclear device explode. [ It's a tough enough job to
consruct the "first wall" for a BB-sized fusion capsule. ]

Dr. Gregory Greenman
Physicist
 
  • #4
Morbius said:
The "first wall" of any type of piston engine is going to be vaporized when it sees the nuclear device explode.
Yet the Orion pusher plate would not be vaporized.
 
  • #5
Project Pacer fitted with piston engines instead of turbines

Antiphon said:
Has enyone (in the realm of fiction even) proposed making an enourmous piston engine that would use nuclear weapons instead of atomized hydrocarbons?
I would call it a reciprocating heat engine. I suspect the reason why nuclear-powered reciprocating heat engines have not been theorized is that turbines tend to be more efficient. There are designs for nuclear explosions powering turbines. Richard Garwin described one called Project Pacer in his book . That design involved a large excavated cavern lined with steel and fitted with turbines. Water is injected in-between explosions. This helps keep things cool and provides steam for the turbines. Explosions occur once per day. Fusion bombs are used, instead of fission bombs, for greater efficiency. 365 fusion bombs are used per year.

If you could make a fusion-explosion turbine power plant such as this, there seems to be no reason why you could not make a fusion-explosion reciprocating power plant. There would be a difference, though, in that you are thinking of one giant piston, whereas a truer analog of the Project Pacer power plant would be a steel-lined cavity with many small reciprocating steam engines fitted to it.
 
Last edited by a moderator:
  • #6
what if instead of turbines or pistons couldn't u contain such a blast with an electromagnetic field then as far as heat goes couldn't u use that new metal we discovered called carbon carbon which is supposed to with stand the heat of the sun?
 
  • #7
Well I suppose you could make a fission-powered piston engine if you use very small amounts of fissile material and an external neutron source to "ignite" it. How to get a very high flux of thermal neutrons that you can turn on and off on demand without using more energy then the engine makes would be a problem though.
 
  • #8
Even if you could get it to work, wouldn't the amount of energy you'd need to create, move and detonate the nuclear devices severely offset the total efficiency of the whole process?
 
  • #9
hitssquad said:
Yet the Orion pusher plate would not be vaporized.
With Orion they allowed for some ablation of the pusher plate, but even that was minimized by spraying a thin layer of oil on the plate before each shot.

You can read some details here:
http://en.wikipedia.org/wiki/Project_Orion_(nuclear_propulsion)"

There are some nice illustrations here:
http://www.flickr.com/photos/xeni/sets/72157594329917915/"

There is also a book: Project Orion: The True Story of the Atomic Spaceship By George Dyson
 
Last edited by a moderator:
  • #10
Orion was problematic for a number of reasons - mass of a huge number of detonators being one.

Please also note that the thread to which robo warrior responded has a last post of Jul15-05. It is 4 years, 4 months old.
 

What is a giant nuclear powered combustion engine?

A giant nuclear powered combustion engine is a type of engine that uses nuclear energy to generate heat, which is then used to power a combustion process to produce mechanical energy.

How does a giant nuclear powered combustion engine work?

A giant nuclear powered combustion engine works by using a nuclear reactor to heat a fluid, such as water or gas, which is then used to turn a turbine. The turbine then powers a combustion process, typically involving fuel and air, to produce mechanical energy.

What are the advantages of a giant nuclear powered combustion engine?

The main advantage of a giant nuclear powered combustion engine is its ability to produce large amounts of energy in a relatively small space. It is also more efficient and produces less pollution compared to traditional combustion engines.

What are the safety precautions for using a giant nuclear powered combustion engine?

Safety precautions for using a giant nuclear powered combustion engine include regular maintenance and monitoring of the nuclear reactor, proper handling and storage of nuclear fuel, and following strict safety protocols to prevent accidents or radiation leaks.

What are the potential risks of using a giant nuclear powered combustion engine?

The potential risks of using a giant nuclear powered combustion engine include the possibility of accidents or malfunctions leading to radiation leaks, as well as the challenges of safely disposing of nuclear waste. There is also the concern of nuclear proliferation if the technology falls into the wrong hands.

Similar threads

  • Nuclear Engineering
Replies
2
Views
1K
Replies
10
Views
2K
  • Nuclear Engineering
Replies
0
Views
600
  • Mechanical Engineering
Replies
3
Views
2K
Replies
5
Views
896
  • High Energy, Nuclear, Particle Physics
Replies
11
Views
1K
  • Nuclear Engineering
Replies
9
Views
2K
Replies
20
Views
2K
Replies
11
Views
2K
  • Mechanical Engineering
Replies
2
Views
197
Back
Top