Register to reply

Are phosphor sheets used in CRTs transparent?

by chhitiz
Tags: crts, phosphor, sheets, transparent
Share this thread:
chhitiz
#1
Sep12-13, 06:05 AM
P: 221
and if they are, to what extent?
Phys.Org News Partner Engineering news on Phys.org
Eye implant could lead to better glaucoma treatment
Electricity helping the blind navigate
Lawsuits challenge US drone, model aircraft rules (Update)
berkeman
#2
Sep12-13, 11:10 AM
Mentor
berkeman's Avatar
P: 41,012
Quote Quote by chhitiz View Post
and if they are, to what extent?
I don't think they are, but it would take some digging to figure this out. What is the context of the question?
chhitiz
#3
Sep12-13, 11:42 AM
P: 221
well, if you look at a CRT TV turned off, you just see blackness (and a bit of reflection of the screen), not tiny red green blue dots, so i think, maybe they are transparent.

berkeman
#4
Sep12-13, 11:43 AM
Mentor
berkeman's Avatar
P: 41,012
Are phosphor sheets used in CRTs transparent?

Quote Quote by chhitiz View Post
well, if you look at a CRT TV turned off, you just see blackness (and a bit of reflection of the screen), not tiny red green blue dots, so i think, maybe they are transparent.
Look closer with a magifying glass...
berkeman
#5
Sep12-13, 11:48 AM
Mentor
berkeman's Avatar
P: 41,012
Quote Quote by berkeman View Post
Look closer with a magifying glass...
And use a flashlight. You should be able to see the phosphur surface, not the inside of the CRT.
chhitiz
#6
Sep13-13, 07:47 AM
P: 221
how very stupid of me. another thing, can you tell me if the indivudual particles of phosphor are at micro or nano scale? if they they are nano sized and embedded (closely packed) in a plastic sheet, would it be transparent.
berkeman
#7
Sep13-13, 11:27 AM
Mentor
berkeman's Avatar
P: 41,012
Quote Quote by chhitiz View Post
how very stupid of me. another thing, can you tell me if the indivudual particles of phosphor are at micro or nano scale? if they they are nano sized and embedded (closely packed) in a plastic sheet, would it be transparent.
It sounds like you would like to have a way to have a transparent coating that has the properties of phosphor? Are you going to use an electron beam to excite the phosphor? Are you aware of the X-ray generation issues with using an electron beam to excite phosphor?
Baluncore
#8
Sep13-13, 08:52 PM
Sci Advisor
Thanks
P: 1,906
The CRT EHT voltage was used to accelerate an electron beam that could then be focussed and deflected to raster scan the phosphor screen. There is no need for EHT to cause a phosphor to emit visible light. The generation of X-rays of 10 to 30keV is best avoided.

Visible light has an Energy = Plank's constant x Frequency. Three volts is sufficient as is demonstrated by the forward voltage of light emitting diodes.

Maybe consider electroluminescent display technology where a phosphor is placed between the plates of a capacitor. http://en.wikipedia.org/wiki/Electroluminescence
Alkim
#9
Oct11-13, 03:20 PM
P: 98
These phosphors can not be transparent even if embedded in a plastic film due to the difference between the refractive indexes of the polymer and the inorganic phosphor particles. However, if you need a transparent luminescent material there are glasses and single crystals for this purpose.


Register to reply

Related Discussions
UV light absorption by transparent sheets how? General Physics 8
How fast do CRTs shoot electrons? High Energy, Nuclear, Particle Physics 6
Phosphor Powder for solar cells Chemistry 1
Thevinin Question (electrical Crts) Engineering, Comp Sci, & Technology Homework 2