Solve Viscosity Problem: Time for Equal Levels in 2 Cylinders

  • Thread starter neelakash
  • Start date
  • Tags
    Viscosity
In summary, the problem involves two identical vertical cylindrical vessels connected by a narrow horizontal tube. A liquid with density d and coefficient of viscosity λ flows from one vessel to the other. Initially, the liquid surfaces in the cylinders are at heights 3H and H. The goal is to find the time at which the levels of the liquid in both vessels will be equal. Using Poiseuille's law and solving for h as a function of time, it is determined that the levels will approach equality as time goes to infinity.
  • #1
neelakash
511
1

Homework Statement



Two identical vertical cylindrical vessels of cross section α are joined at thir bases by a narrow horizontal tube of length l and internal radius r.A liquid of density d and co-efficient of viscosity λ is flowing slowly from one vessel to the other through the tube.Initially the liquid surfaces at the two vessels are at heights 3H and H respectively over the capillary tube.After what time will the levels be equal?

Homework Equations


The Attempt at a Solution



Plesae check if I am correct:::

the higher cylinder starts at height 3H while the lower starts at height H. We will call the height (at any time) in the lower cylinder "h" and find h as a function of time, ok? At any time we will call the height in the higher cylinder h'

First, because the two cylinders have equal cross section areas, the total of the heights in both cylinders at any time is 4H, so

h = 4H - h' at any time (note that h increases while h' decreases)

Ok, now for Poiseuilles law:

dV / dt = ( π r4 / 8 λ L ) Δp where L is the length of the capillary tube.

The dV/dt refers to the flow rate, rate of volume flow. And the delta p refers to the difference in pressure from one end of the tube to the other.

We can express dV/dt in terms of dh/dt, the rate at which the height rises in the lower cylinder, and a, the cross section area: dV/dt = a dh/dt

And we can realize that the diff in pressure is caused by a diff in height of the two columns:

Δp = d g ( h' - h ) (remember d is the density)

Now put this all together:

a dh/dt = ( π r4 / 8 λ L ) d g ( h' - h )

dh/dt = ( π r4 d g / 8 a λ L ) ( 4H - h - h )

dh/dt = ( π r4 d g / 8 a λ L ) ( 4H - 2h )

dh/dt = ( π r4 d g / 4 a λ L ) ( 2H - h )

To make life easier, I'm going to call all that mess in the parentheses "K", because its all constant stuff anyway

dh/dt = K ( 2H - h )

And now you can easily solve for h as a function of time:

dh / (2H - h) = K dt integrate both sides. Use a substitution on the right


u = 2H - h du = -dh so

- du / u = Kt

You end up with ln ( (2H - h ) / H ) = - Kt

Solve for h and you get h = H ( 2 - e-Kt )

Notice that at t = 0, h is equal to H, just as it should be. So when will h equal 2H? When

e-Kt is equal to zero, which happens at... hmmm... well, as t goes to infinity.

Is the analysis correct?
 
Physics news on Phys.org
  • #2
Yes, you are correct. With time the pressure difference is approaching to zero and hence rate of flow is also approaching to zero and the time taken for last bit is approaching to infinite, theoretically. That is why in the question they ask that at what time the difference in the level will be halved or so. Or they ask for the difference in level at a given time t.
 

1. What is Viscosity?

Viscosity is the measure of a fluid's resistance to flow. It is a measure of the internal friction within the fluid, with higher viscosity fluids being thicker and more resistant to flow.

2. How does Viscosity affect the time for equal levels in 2 cylinders?

The higher the viscosity of a fluid, the longer it will take for the fluid to flow and reach equal levels in two cylinders. This is due to the increased internal friction within the fluid, which slows down the flow rate.

3. What factors can affect the Viscosity of a fluid?

The viscosity of a fluid can be affected by temperature, pressure, and the composition of the fluid. For example, higher temperatures can decrease viscosity, while higher pressure can increase it. Different types of fluids also have different inherent viscosities.

4. How is Viscosity measured?

Viscosity is typically measured in units called poise or centipoise. It can be measured using a viscometer, which measures the time it takes for a fluid to flow through a specific tube or channel at a given temperature and pressure.

5. How can Viscosity problems be solved?

To solve a viscosity problem, we can use the equation: Q = (pi*r^4 * (P1-P2))/ (8*η*L). Q represents the flow rate, r is the radius of the tubes, P1 and P2 are the pressures at the two ends of the tubes, η is the viscosity of the fluid, and L is the length of the tubes. By rearranging this equation, we can solve for any of the variables as needed.

Similar threads

  • Advanced Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
19
Views
804
  • Introductory Physics Homework Help
Replies
11
Views
794
Replies
11
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
2K
  • Calculus
Replies
1
Views
1K
  • Calculus and Beyond Homework Help
Replies
4
Views
2K
  • Calculus and Beyond Homework Help
Replies
6
Views
4K
  • Introductory Physics Homework Help
Replies
15
Views
4K
  • Calculus
Replies
1
Views
1K
Back
Top