Question about precession in the case of frisbees

  • Thread starter Thread starter Thundagere
  • Start date Start date
  • Tags Tags
    Precession
AI Thread Summary
The discussion centers on the physics of frisbees, particularly how they can skip off the ground and fly upwards when thrown at an angle. Precession is identified as a key factor, where the angular momentum changes direction due to a torque created by the upward normal force upon impact. The interaction between the torque vector and the rotation vector causes the frisbee's axis of rotation to shift, resulting in an upward pitch. Additionally, the design of cambered airfoils like frisbees introduces a pitch-down torque, which is partially countered by the center of lift being ahead of the center of mass. The conversation also touches on how flying rings, such as aerobie, can be engineered to minimize rolling during flight.
Thundagere
Messages
159
Reaction score
0
So, I was trying to figure out the physics of frisbees. When you throw a frisbee at the ground at an angle (such that the side to the left of you, assuming you are right handed, hits the ground first), then it will suddenly skip up and fly upwards (Youtube has some great videos of it, for anyone who hasn't seen this). Someone told me this was because of precession. How does this work?
Precession is the phenomenon where the angular momentum changes in the direction of a net torque, correct? In this case, we have an upward normal force, so a torque horizontal to the ground going away from the thrower on the edge of the frisbee. The angular momentum vector is, of course, through the axis of rotation. They're almost 90 degrees to each other, so how would precession work in this case to flip the frisbee up?
Thanks for any help!
 
Physics news on Phys.org
The frisbee is just bouncing off the ground, the same as any semi-elastic colliision. Precession also occurs, but almost all of the change in direction from the ground is due to bouncing.
 
In this case, we have an upward normal force, so a torque horizontal to the ground going away from the thrower on the edge of the frisbee. The angular momentum vector is, of course, through the axis of rotation. They're almost 90 degrees to each other, so how would precession work in this case to flip the frisbee up?

Exactly.
From above the frisbee is rotating clockwise, so the rotation vector of the frisbee points down.

The normal attempts to twist the axis of rotation of the frisbee clockwise from your perspective.
So you have a torque vector from this normal pointing away from you.

From that you can deduce the direction of the resulting precession vector which will cause the frisbee axis of rotation to change direction and cause it to what looks like a skip and fly upwards.

Here is a site that explains how the three vectors are related:
http://www.motivate.maths.org/content/wonderful-world-gyroscopes/gyroscopic-effect
 
Last edited by a moderator:
256bits, thanks for that website reference! One of the better explanations I've ever seen!
 
256bits said:
From above the frisbee is rotating clockwise, so the rotation vector of the frisbee points down. The normal attempts to twist the axis of rotation of the frisbee clockwise from your perspective. So you have a torque vector from this normal pointing away from you.
So the result is a pitch upwards of the frisbee, causing it to climb, but there is an initial bounce, and I wasn't sure if you were asking about the bounce or the tendency to climb afterwards.

Also, for a cambered airfoil like a frisbee, there's a pitch down torque. This is somewhat compensated for by having the center of lift in front of the cetner of mass, but generally it's a pitch down torque, that results in a roll reaction (precession) during longer flights.

A flying ring, such as an aerobie, solves this problem and can be "tuned" so that it does not roll during long flights.

http://aerobie.com/about/ringscientificpaper.htm
 
Last edited by a moderator:
Thread 'Gauss' law seems to imply instantaneous electric field'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...
Back
Top