A question about ultrasonic wave

  • Thread starter Thread starter fannyfanfanz
  • Start date Start date
  • Tags Tags
    Ultrasonic Wave
AI Thread Summary
Shear wave splitting occurs when a linearly polarized shear wave enters an anisotropic material, resulting in a fast and slow shear wave. At normal incidence, the effect of changing the polarization of the incoming shear wave on the fast shear wave speed is debated. Some argue that wave splitting cannot occur at normal incidence, meaning polarization changes would not affect the fast wave speed. However, if the shear wave's propagation direction is not aligned with the c-axis in transversely isotropic materials, splitting can still happen. The discussion highlights the complexities of wave behavior in anisotropic materials.
fannyfanfanz
Messages
12
Reaction score
0
Hi,

When a linearly polarized shear wave enters an anisotropic material, shear wave splitting (a fast and a slow shear waves) will occur.
My question is, under normal incident, will the fast shear wave speed vary if the polarization of the incoming shear wave changes?

Thanks!
 
Physics news on Phys.org
fannyfanfanz said:
Hi,

When a linearly polarized shear wave enters an anisotropic material, shear wave splitting (a fast and a slow shear waves) will occur.
My question is, under normal incident, will the fast shear wave speed vary if the polarization of the incoming shear wave changes?

Thanks!
Not sure how you can have wave splitting at normal incidence, so rotating polarization will not have any effect.
 
tech99 said:
Not sure how you can have wave splitting at normal incidence, so rotating polarization will not have any effect.
If the propagation direction of the shear wave is not parallel to the c-axis (assuming the material is transversely isotropic), the shear wave will split at normal incidence.
 
Consider an extremely long and perfectly calibrated scale. A car with a mass of 1000 kg is placed on it, and the scale registers this weight accurately. Now, suppose the car begins to move, reaching very high speeds. Neglecting air resistance and rolling friction, if the car attains, for example, a velocity of 500 km/h, will the scale still indicate a weight corresponding to 1000 kg, or will the measured value decrease as a result of the motion? In a second scenario, imagine a person with a...
Dear all, in an encounter of an infamous claim by Gerlich and Tscheuschner that the Greenhouse effect is inconsistent with the 2nd law of thermodynamics I came to a simple thought experiment which I wanted to share with you to check my understanding and brush up my knowledge. The thought experiment I tried to calculate through is as follows. I have a sphere (1) with radius ##r##, acting like a black body at a temperature of exactly ##T_1 = 500 K##. With Stefan-Boltzmann you can calculate...
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (First part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8 and stuck at some statements. It's little bit confused. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. Solution : The surface bound charge on the ##xy## plane is of opposite sign to ##q##, so the force will be...
Back
Top