Antenna Measurement: Horns, Frequency, & Gain Modeling

AI Thread Summary
Two horn antennas operating between 800 MHz and 2.5 GHz are experiencing a ringing effect during gain measurements, which varies with the distance between them. This phenomenon may be related to multipath effects caused by reflections between the antennas. A Fourier series could potentially model these reflections and their impact on the measurements. The discussion emphasizes the need for a mathematical approach to understand the ringing effect better. Overall, modeling this effect could enhance the accuracy of gain measurements in antenna setups.
lisawoods
Messages
9
Reaction score
0
I have 2 horn antennas facing each other each has a size A & B respectively they operate at a frequency 800MHz to 2.5 GHz. they are a distance D apart. when making gain measurments there is a ringing effect which changes as the horns are moved futher or closer apart. Does anyone know if this effect can be modeled as a Fourier series
 
Engineering news on Phys.org
A Fourier series of what? Sounds like multipath...
 
antenna

the Fourier series would model the effect of the reflections between to the horns.
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top