Batteries: Is the current a diffusion current?

AI Thread Summary
The discussion centers on the mechanics of lithium-ion batteries, particularly the nature of current during charging and discharging processes. It highlights that while both electrodes remain electrically neutral, the anode accumulates more particles, leading to a higher chemical potential. This raises questions about whether the current is a diffusion current, given the absence of electrostatic force between the electrodes. The conversation also touches on the complexities of terminology in electrochemistry and the factors influencing ion movement, including the role of electric fields and chemical reactions. Overall, the participants express frustration over the difficulty of understanding these concepts clearly.
SchroedingersLion
Messages
211
Reaction score
56
Greetings,

I realized that I don't understand a fundamental fact of common Li-ion batteries.

During the charging process, electrons are forcefully extracted from the cathode and pushed into the anode. Charge balance then yields a flow of positive Li ions from the cathode to the anode (through the electrolyte), where they are bound by the additional electrons.
That implies that both electrodes are still electrically neutral. However, the anode has higher chemical potential as more particles accumulated there (electrons and Li ions).
But this would mean that the current during the discharge process is actually a diffusion current. Since both electrodes are electrically neutral, there should be no electrostatic force between them.

Is this correct?
 
Engineering news on Phys.org
SchroedingersLion said:
Since both electrodes are electrically neutral, there should be no electrostatic force between them.

Is this correct?
If there is a voltage difference between two electrodes then there is an electric field and also an attractive force between the electrodes.
 
Baluncore said:
If there is a voltage difference between two electrodes then there is an electric field and also an attractive force between the electrodes.

So where does it come from then? There should be no net charge accumulation at the electrodes shouldn't it?
 
Remember the electron flow path is external so we have charge separation (an electric field) inside the cell.

 
  • Like
Likes SchroedingersLion
SchroedingersLion said:
Is the current a diffusion current?
It depends on interpretation. The language becomes difficult and the terminology changes where electronics, current and voltage, meets with the chemistry. You should stand on one side or the other.

An electrochemical cell is composed of two separate half-cell reactions. The reactions proceed together only while electrons are removed from the negative electrode and returned through the external circuit to the positive electrode.

There must also be a diffusion of ions through the electrolyte to supply or balance the external electron flow. The maximum current available from a cell is determined by the rate of the chemical reaction, limited by the rate of ion diffusion, which increases with temperature.
 
  • Like
Likes SchroedingersLion
nsaspook said:
Remember the electron flow path is external so we have charge separation (an electric field) inside the cell.



Thanks for the video. The part I don't understand is 4:30.
Why would Li ions want to move back? Fine, they might prefer the state in the metal oxide, but at the moment, they are spatially separated from there. They will only move there if there is a force that pulls them there. But where does this force come from? The same positive and negative charge traveled from left to right, there should be no electric field.

Baluncore said:
It depends on interpretation. The language becomes difficult and the terminology changes where electronics, current and voltage, meets with the chemistry. You should stand on one side or the other.
That's pretty frustrating. One would have thought that a MSc. in physics teaches you the correct terms to describe an every-day-thing such as a battery. I always feel like the explanations found online are way too simplified. Or my understanding is just too poor.

Btw. why can the Li ions cross the separation layer, but the electrons can't? The latter are thousands of times smaller. It can't be a potential barrier, otherwise the Li ions would not be able to return on their own.
Man, this is confusing o_O
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top