Bullet Proof Shields For Military Infantry

AI Thread Summary
The discussion centers on the practicality and development of bulletproof shields for military infantry. Participants express skepticism about the utility of shields, suggesting that they may hinder mobility and require an extra hand, which is impractical in combat situations. Current body armor, like the IOTV, is designed to stop significant rounds and is preferred over shields for protection. The conversation also highlights the importance of carrying mission-essential packs, which can provide additional cover and contain necessary equipment. Future advancements in protective technology, such as monofilament mesh or active camouflage, are mentioned as potential improvements.
average guy
Messages
119
Reaction score
0
mechie's
i saw some news footage awhile ago
and the troops were running across an airport runway
being sniped at.
where are they at with developing and issuing shields now?
anybody have first hand experience.
is the thinking keep the heavy pack on so
you don't get shot in the back?
if so i say ditch the pack and go ask for a back shield.
i have seen some shields in sci fi movies and series.
( my girlfriend watches them )

Have A Nice Day!
 
Engineering news on Phys.org
No idea what purpose a shield would really have besides make us use an extra hand which believe it or not will not be possible. As for the pack, it depends which pack you mean. The large MOLLE ruck we usually ditch if assaulting an objective but carry if moving out of a kill box simply because it has all our stuff (mortar shells, food, sleeping bag, etc) and leaving it in a kill box seems like a bad idea. Heck it can even be used to form low cover and base for firing.

The assault pack on the other hand is kept because it, well the name gives it away. So no it isn't used to stop from getting shot in the back. The IOTV is capable of stopping a 7.76mm round. (The IOTV is the body armor currently issued.)
 
A good friend of mine is a forward air controller. Been shot 5 times. $6500 of body armor has kept him safe. It has ceramic plates in the critical spots. They shatter and are replaced.
 
Engineers somewhere else said they're 2 packs; to paraphrase 'full pack' and 'attack pack'. The one time i saw on tv just looked bad, running across open space with full pack. Sounds like things are getting done right and that's good. Idea of shield is light and for temporary protection. Maybe just urban scenario and zero pack once again all sounds good. Go get 'em.

Have A Nice Day!
 
Last edited by a moderator:
the pack contains equipment, and tools necessary to complete a particular mission.
as far as shields go, technology that can be implemented within ten years, maybe a monofilament mesh of some sort or active camouflage
 

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »

Similar threads

What are your thoughts on 'Ad Astra' and Will Smith's upcoming Gemini Man?
Replies
12
Views
4K

Hot Threads

Recent Insights

Back
Top