Bus Circular Motion: Calculating Minimum Friction for Laptop Stability

AI Thread Summary
To determine the minimum coefficient of static friction required to prevent a laptop from sliding on a bus seat during a turn, the centripetal force formula F_c = mv^2/r is essential. The frictional force can be expressed as f = μ_s N, where N is the normal force. A free body diagram (FBD) can help visualize the forces acting on the laptop. The discussion emphasizes the importance of understanding these concepts, especially for those who missed classes. Participants are encouraged to share their solutions for further assistance.
farhannaeem
Messages
6
Reaction score
0
A bus passenger has her laptop sitting on the flat seat beside her as the bus, traveling at 10.0 m/s, goes around a turn with a radius of 25.0 m. what minimum coefficient of static friction in necessary to keep the laptop from sliding?
 
Physics news on Phys.org
Please show some work before we try to help you.
 
i am trying to get the steps on how to do this question. i can not think of a way to start this question.
 
Can you draw a FBD? If you can proceed. If not, I suggest you study that thoroughly before you attempt these questions

I will give you the necessary equations:

Centripetal Force F_{c} = \frac{mv^2}{r}

Frictional Force f = \mu_s N, where N is the normal force.
 
thanks ill try my best to finish it off
i was sick fro a couple of weeks
so i missed classes and now I am trying to study for the assignments and the tests i missed
 
Ah! ok. Do ask if you have issues learning anything. We can help. And when you do solve this question, follow up on this post and show what you have done.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top