Calculating Theoretical Transfer Efficiency for Wireless Energy System

  • Thread starter Thread starter redhot2k4
  • Start date Start date
  • Tags Tags
    Energy Wireless
redhot2k4
Messages
1
Reaction score
0

Homework Statement


I have built a wireless system as described at the following site http://www.ar2r.50webs.com/wte/wte.html"

I would like to be able to apply some theory to it and calculate a theoretical value for the transfer efficiency over certain distances

Does anybody have any idea of the theory I would need to use??

The Attempt at a Solution



In a paper by Andre Kurs, "Power transfer through strongly coupled resonances" he derives a formula for transfer efficiency from coupled mode theory however it is complicated and the coils he uses are self resonant, where as mine have a raised capacitive plate making them an LC resonant circuit

Any help would be greatly appreciated

Cheers
 
Last edited by a moderator:
Physics news on Phys.org
redhot2k4,

Would it matter whether the coil was self-resonant or not? The self-resonant inductors still use capacitance, but it's part of the coil... I would think you could use the same formula.

Michael
http://www.starmanelectric.com
 
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top