Can a Bubble Increase Radio Wave Refraction Effectively?

  • Thread starter Thread starter loom91
  • Start date Start date
  • Tags Tags
    Refraction
AI Thread Summary
The discussion revolves around the feasibility of using a bubble made from a refractive material to enhance the refraction of radio waves for a science project. The original idea suggests that a bubble could minimize reverse refraction effects seen in traditional lenses, potentially allowing for better directionality of radio waves. Participants suggest alternatives, such as using a wire grid or a waveguide tailored to the specific radio frequency, as more effective methods for achieving the desired refraction. The conversation also touches on the limitations of affordable lenses for this purpose. Overall, the concept of using a bubble for radio wave refraction is questioned, with alternative methods proposed for better results.
loom91
Messages
404
Reaction score
0
Hi,

As the part of a science project, I'm trying to refract communicational radio-waves towards a point. I first thought about using a lens, but because of double refraction when passing through a lens, relatively little refraction is achieved. I thought that if I could create a bubble of some refractive yet transparent materi9al and place the receptor inside this bubble, then the waves would continue to get refracted without reverse refraction, thereby enabling me to achieve higher refraction.

I wish to know if I've got refraction right. Am I thiunking rightly?

Beside that, can you possibly tell me the possible refractive limit of a lens that's not too expensieve(not observatory quality, something that can be afforded by a ordinary man)?

If the bubble theory is wirkable, what substance should I use as the material for my bubble?

To clarify my points, I've uploaded two pictures of the two concepts at http://loom91.tripod.com/lens.jpg and http://loom91.tripod.com/bubble.jpg. Pls take a look at them.

Thanx to you all for help.

Molu
 
Last edited by a moderator:
Science news on Phys.org
I think you might need a wire grid to refract radio waves.

Njorl
 
A wire grid?/
 
Why don't you just use a waveguide for the specific frequency of radio you're using.
 
Thread 'A quartet of epi-illumination methods'
Well, it took almost 20 years (!!!), but I finally obtained a set of epi-phase microscope objectives (Zeiss). The principles of epi-phase contrast is nearly identical to transillumination phase contrast, but the phase ring is a 1/8 wave retarder rather than a 1/4 wave retarder (because with epi-illumination, the light passes through the ring twice). This method was popular only for a very short period of time before epi-DIC (differential interference contrast) became widely available. So...
I am currently undertaking a research internship where I am modelling the heating of silicon wafers with a 515 nm femtosecond laser. In order to increase the absorption of the laser into the oxide layer on top of the wafer it was suggested we use gold nanoparticles. I was tasked with modelling the optical properties of a 5nm gold nanoparticle, in particular the absorption cross section, using COMSOL Multiphysics. My model seems to be getting correct values for the absorption coefficient and...
Back
Top