Can Emerging Battery Technologies Approach the Energy Density of Liquid Fuels?

  • Thread starter Thread starter Ryan_m_b
  • Start date Start date
  • Tags Tags
    Battery Liquid
AI Thread Summary
Emerging battery technologies face significant challenges in matching the energy density of liquid fuels, with current options like ultracapacitors and fuel cells falling short. Recent advancements in supercapacitors made from laser-scribed graphene show promise for high energy density and stability, but comparisons to liquid fuels remain limited. Discussions also highlight the potential of aluminum-air batteries and nanotechnology in lithium cells, though deployment issues persist. Nuclear options, such as alpha or beta-voltaics, are noted for their longevity but lack the power needed for electric vehicles and raise safety concerns. Overall, while research is ongoing, no technology has yet demonstrated the capability to rival liquid fuels effectively.
Ryan_m_b
Staff Emeritus
Science Advisor
Homework Helper
Insights Author
Messages
5,963
Reaction score
726
I've been reading a lot about solar power recently and far greater uses that could be unlocked if we only had a viable way of storing the energy. I've encountered the fact that no battery as yet comes close to rivaling liquid fuels for as energy as well as research pursuing artificial photosynthesis in order to combine solar power with liquid fuels.

My question is whether or not there are any good avenues of research that promise to deliver batteries that, whilst maybe not equaling or out-performing, could offer specific energy/energy density reasonably close to liquid fuels? I've read about ultracapacitors and fuel cells but even they have energy densities hundreds of times smaller than liquid fuels.

Thanks :smile:
 
Engineering news on Phys.org
You mentioned ultracapacitors. This months Photonics Spectra has the article Supercapacitors created from laser-scribed graphene.

From Science Magazine:

http://www.sciencemag.org/content/335/6074/1326

Abstract

Although electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, charge and discharge faster than batteries, they are still limited by low energy densities and slow rate capabilities. We used a standard LightScribe DVD optical drive to do the direct laser reduction of graphite oxide films to graphene. The produced films are mechanically robust, show high electrical conductivity (1738 siemens per meter) and specific surface area (1520 square meters per gram), and can thus be used directly as EC electrodes without the need for binders or current collectors, as is the case for conventional ECs. Devices made with these electrodes exhibit ultrahigh energy density values in different electrolytes while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high-power, flexible electronics.
 
just musing here

for years I've been fascinated by the aluminum atom.
It binds so tightly with oxygen that Al was a rare metal until electrolytic refining and hydropower came alomg in very late 1800's.

Seems that energy you put into separate it ought to be available by letting it recombine.
 
I heard something about nanotech and lithium cells. I'd put my money there, if I had any.

Of course, there is always the nuclear option. Alpha or beta-voltaics are most commonly used in stuff like pacemakers. It's basically alpha or beta particles and a p-n junction. Simple things, I suppose. Those don't deliver enough power to really provide the oomph you'd need for an electric vehicle, but they apparently last quite a while.

Being similar in concept to photovoltaics, if they scale the same way that solar does, I suppose you could get it to power a car, maybe. The NIMBY factor gets pretty harsh as you scale it up, though. Having to decontaminate an entire block every time someone gets into a car accident would be a nightmare. I probably get enough radiation from decomposing radium underneath my house, injecting tritium into your electric garden trimmer the way you'd refill a butane lighter is where I say "no thanks".
 
dlgoff said:
You mentioned ultracapacitors. This months Photonics Spectra has the article Supercapacitors created from laser-scribed graphene.

From Science Magazine:

http://www.sciencemag.org/content/335/6074/1326
Interesting, looks promising from the perspective of the fairly simple tools and materials they use. I don't have access to the full article unfortunately so I'm not sure how such a device would compare to a liquid fuel.
jim hardy said:
just musing here

for years I've been fascinated by the aluminum atom.
It binds so tightly with oxygen that Al was a rare metal until electrolytic refining and hydropower came alomg in very late 1800's.

Seems that energy you put into separate it ought to be available by letting it recombine.
Interesting :smile: it seems this has been researched but there are problems with its deployment
http://en.wikipedia.org/wiki/Aluminium–air_battery
Kurinn said:
I heard something about nanotech and lithium cells. I'd put my money there, if I had any.

Of course, there is always the nuclear option. Alpha or beta-voltaics are most commonly used in stuff like pacemakers. It's basically alpha or beta particles and a p-n junction. Simple things, I suppose. Those don't deliver enough power to really provide the oomph you'd need for an electric vehicle, but they apparently last quite a while.

Being similar in concept to photovoltaics, if they scale the same way that solar does, I suppose you could get it to power a car, maybe. The NIMBY factor gets pretty harsh as you scale it up, though. Having to decontaminate an entire block every time someone gets into a car accident would be a nightmare. I probably get enough radiation from decomposing radium underneath my house, injecting tritium into your electric garden trimmer the way you'd refill a butane lighter is where I say "no thanks".
Radioactive cars? Yikes! I wouldn't say it was NIMBYish, think of how often car crashes happen (IIRC leading to 3000 deaths per month in the US) and now think of how much worse they would be if each was radioactive lol.

I have read about nanoengineered litium ion batteries but they seem to benefit in terms of faster charging and discharging rather than energy density.
 
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top