Can I Power a LED Strip with a Solar Panel?

Click For Summary
SUMMARY

It is feasible to power a 6-inch LED strip using a 1" x 6" solar panel by incorporating a battery for nighttime operation. The LED strip can be activated by a pressure-sensitive switch, which detects weight and keeps the light on as long as contact is maintained. The solar panel will charge the battery, ensuring a constant power supply for the LED strip. This setup allows for efficient use of solar energy while providing functionality in low-light conditions.

PREREQUISITES
  • Basic understanding of solar panel functionality
  • Knowledge of LED strip specifications and power requirements
  • Familiarity with pressure-sensitive switches and their applications
  • Experience with battery charging circuits
NEXT STEPS
  • Research solar panel sizing and output for LED applications
  • Learn about battery types suitable for solar-powered LED systems
  • Explore different types of pressure-sensitive switches
  • Investigate wiring diagrams for solar-powered LED installations
USEFUL FOR

This discussion is beneficial for hobbyists, DIY enthusiasts, and anyone interested in solar energy applications for lighting solutions, particularly those with a focus on integrating sensors and LED technology.

lozano04
Messages
1
Reaction score
0
Hey Guys, I have no background or experience in electrical engineering. I have not been able to find any information regarding the wiring application I am trying to achieve. Any help would be greatly appreciated.

Is it possible to do the following;

I want to run a 6 inch LED strip that is activated by touch or pressure. I would need some type of sensor that would detect weight has been applied and then in turn would activate the LED strip. The light would need to be constant as long as there was something making contact with the sensor. I need it to be powered by a 1" x 6" solar panel or cell. Is this possible?
 
Engineering news on Phys.org
Welcome to PF;
Short answer: yes. - don't know about the solar cell but LEDs don't need much.
I'd have the solar cell charge a battery, since you probably want the LED strip to work in the dark.
The "sensor" is just a switch.
 

Similar threads

Solar panel conundrum -- Not enough power?
  • · Replies 7 ·
Replies
7
Views
2K
Can a 2' Multicolor LED Strip Be Powered by Two CR2032 Batteries?
  • · Replies 8 ·
Replies
8
Views
2K
Solar panel with circuit inside a PC box -Not working
  • · Replies 3 ·
Replies
3
Views
2K
Could you use Solar to power a DC to AC Inverter? (Description below)
  • · Replies 6 ·
Replies
6
Views
4K
Is it possible to run a pond filter using a solar panel?
  • · Replies 13 ·
Replies
13
Views
4K
Switching between parallel and series connections (solar)
  • · Replies 31 ·
2
Replies
31
Views
5K
Solar Panel System Troubleshooting - Charging Battery
  • · Replies 153 ·
6
Replies
153
Views
17K
High School Why can't Solar panels be hemispherical, or a curved strip type?
  • · Replies 38 ·
2
Replies
38
Views
3K
Can RGB LED simulate incandescent bulb 'glow'?
  • · Replies 3 ·
Replies
3
Views
3K
Is a self-powered transmitter possible?
  • · Replies 22 ·
Replies
22
Views
2K