Can someone please explain to me the concept of vortex breakdown?

AI Thread Summary
Vortex breakdown is a phenomenon characterized by a rapid change in the core radius of a vortex filament, often resulting in a bubble or spiraling thread. It is related to the swirl number (SN), which is the ratio of swirl to meridional motion strengths, and its disappearance occurs as the SN decreases. The concept of helicity in vortices suggests that vortex lines form axial screw patterns, which can lead to instabilities. Despite its experimental discovery, there is no widely accepted theoretical framework for vortex breakdown, indicating a gap in understanding that presents opportunities for further research. The relationship between vortex breakdown and various parameters like swirl number and Reynolds number is primarily established empirically.
sashankhrao
Messages
17
Reaction score
0
Can someone please explain to me the concept of vortex breakdown?
 
Physics news on Phys.org


Other than viscosity? Is there a particular instability you are thinking about?
 


Hi Andy,

Thanks for your reply.Actually I don't understand the concept of vortex breakdown and its relation to Swirl Number (SN) which is defined as the ratio of swirl to meridianol motion strengths. I have read that vortex breakdown diappearance occurs as the SN decreases.
 
Yikes... I've never heard of a swirl number. My only resource is "Vortex Dynamics" by Saffman.

I found a link here (http://www.enme.umd.edu/combustion/underwater_propulsion.htm) with some information that helped.

If I understand your context, you are referring to a "vortex with helicity", which I think means that the vortex lines form axial screw patterns. The swirl number seems to be related to the pitch angle of the vortex lines, but I can't tell for sure. A vortex with helicity has moving vortex lines, which are then subject to instabilities.

"Vortex breakdown" is a rapid change in the core radius of the vortex filament or tube- it was an experimentally-discovered phenomenon, and is characterized by a rapid increase in the core radius, which appears as a bubble or spiraling thread. Saffman claims there is no widely accepted theory for this phenomenon yet.

In practical terms, it means that the relationship between the two is established empirically- by varying the swirl number (and other relevant parameters, for example capillary number, Reynolds number, Rossby number...)- this is glaringly missing from the above webpage. There's probably a lot of opportunity for original contributions to the topic.
 


Hi Andy,

Thank you for your interest in my doubt. If you could assist me with your email address i could send you the document that i am trying to understand. Its on Vortex Breakdown. A pdf file.
 


Sashankhrao,

I just sent you a personal message with my address. Hope I can help!
 
Thread 'Question about pressure of a liquid'
I am looking at pressure in liquids and I am testing my idea. The vertical tube is 100m, the contraption is filled with water. The vertical tube is very thin(maybe 1mm^2 cross section). The area of the base is ~100m^2. Will he top half be launched in the air if suddenly it cracked?- assuming its light enough. I want to test my idea that if I had a thin long ruber tube that I lifted up, then the pressure at "red lines" will be high and that the $force = pressure * area$ would be massive...
I feel it should be solvable we just need to find a perfect pattern, and there will be a general pattern since the forces acting are based on a single function, so..... you can't actually say it is unsolvable right? Cause imaging 3 bodies actually existed somwhere in this universe then nature isn't gonna wait till we predict it! And yea I have checked in many places that tiny changes cause large changes so it becomes chaos........ but still I just can't accept that it is impossible to solve...
Back
Top