Capacitor Cooling: Circuit Info & Bench Cooling

  • Thread starter Thread starter raburgeson
  • Start date Start date
  • Tags Tags
    Cooling
AI Thread Summary
Capacitor cooling is expected to enhance the stability and lifespan of computers by reducing heat generation. The discussion seeks information on the specific circuits involved in capacitor cooling and practical methods for cooling capacitors on a workbench. Participants express a lack of reference materials and technical details available online. A link to a relevant academic source is provided, but further insights are requested. Understanding the cooling techniques for capacitors is crucial for improving electronic performance.
raburgeson
Messages
3
Reaction score
0
I just read computers are going to run cooler because of capacitor cooling.
What type of circuit is involved and how could I cool a small cap on the bench.
 
Engineering news on Phys.org
Try posting some sort of reference.
 
That's the problem,read this on tech news straight from the news link off yahoo's front
page. Being it is a piece on computers and not circuits, it only stated that this cooling
will add extra stabability and product life,it did not cover techniq.I have no reference
material nor can find anything on the net so I came here for help on getting information
on this subject.
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top