Catapult Projectile Question wow

AI Thread Summary
A catapult launches a rock from a height of 35.0 m at an angle of 48.7° with a speed of 26.1 m/s, and the goal is to calculate the horizontal distance traveled. The initial attempt at solving the problem involved using the quadratic formula but resulted in incorrect values due to a sign error in the equation. After correcting the equation to 4.9t² - 19.6t - 35 = 0, the user found the correct time of flight. This adjustment resolved the issue of obtaining imaginary answers, leading to a successful calculation of the projectile's distance. The discussion highlights the importance of careful equation setup in projectile motion problems.
dkbuono
Messages
3
Reaction score
0

Homework Statement



Catapult
A catapult on a cliff launches a large round rock towards a ship on the ocean below. The rock leaves the catapult from a height H = 35.0 m above sea level, directed at an angle theta = 48.7° above the horizontal, and with a speed v = 26.1 m/s. Assuming that air friction can be neglected, calculate the horizontal distance D traveled by the projectile.


Homework Equations


y=y0+Vy0t-1/2gt^2
x=x0+ Vx0t



The Attempt at a Solution



Ok, So I plugged in my knowns to find the time for this, using the first equation setting it up like this 4.9t^2-19.6t+35, where vy0t=26.1*sin48.7 gave me 19.6 then I plugged in my values to the Quadratic formula where the answers I got were 2.97 and 1.03 respectively to find time, so I use the lower of the two numbers and I plug it back into x=x0+Vx0t, since intial D is 0 you add 26.1*cos(48.7) to give 17.2 then you times it to the time calculated 1.03 to get 17.72 m...its not right, I don't understand where I am going wrong I've set it up 7 different ways... This seems like a relatively easy question I only have 2 more tries left on it out of 10. Would someone point me in the right direction I am getting frustrated at this point and feel like and idiot considering its only ch.2.
 
Physics news on Phys.org
I would recalculate your quadratic
4.9t^2-19.6t+35

Only this time I would use 4.9t2 - 19.6t - 35 = 0

You might get a better result.
 
LowlyPion thank you so much you were right that simple error completely distorted everything! :)
 
dkbuono said:
LowlyPion thank you so much you were right that simple error completely distorted everything! :)

I got very suspicious when I saw the solution had 2 imaginary answers.

Glad it worked out.

Good Luck.
 
LowlyPion said:
I got very suspicious when I saw the solution had 2 imaginary answers.

I'm going to have to write that one down. :biggrin:
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top