Ceramic Cutting Tools: Speed & Depth Data

[fbrasileiro]

Could somebody help me to get information of cutting speed and depth of cut for ceramic cutting tools?
I would need to have a data for all the ceramic types.
Thanks!

 

[brewnog]

The manufacturer's technical data sheets should tell you everything you need to know.

A vague question gets a vague answer, so as a guide, for turning, carbide coated tools run at cutting speeds from 25-360m/s, at feed speeds between 0.25-1.5mm/rev.

 

[fbrasileiro]

Clearing up!

Thanks Brewnog!

The thing is, at the company that I work will start to sell Ceramic Cutting Tools and I don't have a technical sheet for it, therefore I want a help to get it in order to formulate one of our own.

Thanks for your help!

 

[fcesar]

Here is something that might help you get started.
There is quite a bit of information there.
http://www.knovel.com/knovel2/Toc.jsp?BookID=241

Boa sorte :):)

 

[brewnog]

I wouldn't start recommending customers with feeds and speeds based on the information I gave you; those details were just typical values for a wide range of workpiece materials and tool types.

The tool manufacturer will be able to give you all the technical data you need.

 

[fbrasileiro]

Thanks!

It happens that my sister company is the manufacturer and they don't have this info., therefore I need to put it together in order to start selling it.
I've got some info. from Kennametal, but it's metal inserts.
(http://chris.gillings.com/collect/slide/kennametal_csc.html)

fcesar: Obrigado, já havia pesquisado neste site, mas gratuitamente não da acesso a este conteúdo!

 

[brewnog]

I'm a bit concerned that the manufacturer doesn't have information for safe cutting speeds, let alone recommended feeds and speeds!

 

[JasonRox]

I'm a bit concerned that the manufacturer doesn't have information for safe cutting speeds, let alone recommended feeds and speeds!

I guess that's no-brand quality right there.