Change in Entropy When Mixing Water at Different Temperatures

Click For Summary
SUMMARY

The discussion focuses on the change in entropy when mixing water at different temperatures, specifically using the formula $$\Delta S = m_1c \int_{T_1}^{T*} \frac{dT}{T} + m_2c \int_{T_2}^{T*} \frac{dT}{T}$$ to calculate entropy changes. The correct answer derived was 3.2 cal/K, while an alternative method yielded an incorrect result of 14.77 cal/K due to misunderstanding the reversibility of the process. The key takeaway is that the mixing process is not reversible as the temperatures of the water change during mixing, affecting the calculations.

PREREQUISITES
  • Understanding of thermodynamic concepts, particularly entropy
  • Familiarity with calculus, specifically integration techniques
  • Knowledge of specific heat capacity, particularly for water
  • Experience with quasi-static processes in thermodynamics
NEXT STEPS
  • Study the principles of thermodynamic reversibility in mixing processes
  • Learn about the derivation and application of the entropy formula in thermodynamics
  • Explore calorimetry and its role in measuring heat transfer
  • Investigate the implications of temperature changes on entropy calculations
USEFUL FOR

Students and professionals in thermodynamics, physicists, and engineers interested in understanding entropy changes during thermal processes.

domephilis
Messages
54
Reaction score
6
Homework Statement
Exercise 11.30 Find the change in entropy if 500g of water at 80C is added to 300g of water at 20C. (Fundamentals of Physics I by R. Shankar)
Relevant Equations
$$dS = \frac{\Delta Q}{T}$$ $$\Delta Q = mc \Delta T$$
After re-reading the book, I did figure out what I was supposed to do. Take both waters through a series of reservoirs to bring them down to their final temperature while allowing for a quasi-static process. Thus, $$\Delta S = m_1c \int_{T_1}^{T*} \frac{dT}{T} + m_2c \int_{T_2}^{T*} \frac{dT}{T}$$. And I did get the correct answer, 3.2 cal/K.

But, before that, I tried a different method; and, my question is why I'm wrong. The method is as follows. I also thought that I needed a reversible (or quasi-static) process. So I imagined the hotter water slowly dripping into the colder water while allowing equilibrium at almost every moment. Then, $$\frac{\Delta Q}{T} = \frac{c(T_h-T(m))dm}{T(m)}$$. T(m) can be easily determined through some calorimetric work. $$T(m) = \frac{T_hm+300T_c}{m+300}$$ We can then integrate both sides to get the change in entropy. $$\Delta S_c = T_h\int_{0}^{500}\frac{dm}{T(m)}-500$$ (Units are in calories, grams, and Kelvin. I have omitted the specific heat because it is one for water.) Hence, $$\Delta S_c = T_h\frac{300}{T_h}(1-\frac{T_c}{T_h})\ln(1+\frac{5}{3}\frac{T_h}{T_c})$$. A similar logic applies to the change in entropy of the hotter water being cooled down by the cold water. Here, I assume that entropy is additive (which was given in the book). The final answer I got was 14.77 cal/K. Setting aside the gory details of the calculations, is there anything wrong with the logic?
 
Physics news on Phys.org
Your alternative path is not reversible. Can you see why?
 
That’s my confusion. I added the water in slowly allowing for equilibrium at almost every moment. If I wanted to reverse a step, I can just pour that drop back in. I am mimicking the quasi-static process described in the book for a gas (i.e. slowly take out grains of sand which compresses a piston while being at equilibrium after each step …).
 
domephilis said:
That’s my confusion. I added the water in slowly allowing for equilibrium at almost every moment. If I wanted to reverse a step, I can just pour that drop back in. I am mimicking the quasi-static process described in the book for a gas (i.e. slowly take out grains of sand which compresses a piston while being at equilibrium after each step …).
I’m not sure this is right, but here’s my guess. When I pour the hot to the cold, I heat the cold water somewhat and gets warmer water. When I try to reverse it by pouring the water back, that bit back is not the 80C that it used to be and will cool the hotter water. Hence, we end up with a result different than our original. Does that sound right?
 
domephilis said:
I’m not sure this is right, but here’s my guess. When I pour the hot to the cold, I heat the cold water somewhat and gets warmer water. When I try to reverse it by pouring the water back, that bit back is not the 80C that it used to be and will cool the hotter water. Hence, we end up with a result different than our original. Does that sound right?
Yes. Very good.
 
Chestermiller said:
Yes. Very good.
I see. Thank you very much. Have a nice day.
 

Similar threads

  • · Replies 12 ·
Replies
12
Views
4K
  • · Replies 6 ·
Replies
6
Views
667
  • · Replies 10 ·
Replies
10
Views
2K
  • · Replies 27 ·
Replies
27
Views
1K
Replies
2
Views
2K
  • · Replies 6 ·
Replies
6
Views
4K
  • · Replies 1 ·
Replies
1
Views
2K
Replies
6
Views
2K
  • · Replies 4 ·
Replies
4
Views
4K
  • · Replies 4 ·
Replies
4
Views
2K