Cloaking a drone

[.Scott]

TL;DR

If this drone was hovering right in front of you, you would only see its ghost.

In an article from Northwestern University, engineers have designed a blurry drone and built a prototype.
The photo below is a screenshot from the video that accompanies the article:

Yes. That's it hovering in front of the plant - that ghostly torus-like thing.

Per the article:

To design the drone, the Northwestern team first used a computational model to generate roughly 20,000 drone configurations capable of stable flight. Then, they used artificial intelligence (AI) and optimization algorithms to repeatedly rearrange the drones’ major components, including a motor, propeller, circuit board, counterweight and batteries. After sifting through many different configurations, the algorithms determined the ideal placement of the drone’s components to minimize its visibility from virtually every viewing angle while allowing for stable flight.

When the device is at rest, it looks like this:

 

[Dale]

That has to put a lot of stress and vibration on the components.

 

[.Scott]

That has to put a lot of stress and vibration on the components.

When they develop a model with a cockpit, we'll have you check that out for us.

 

[256bits]

Interesting using the concept of persistence of vision for their drone model.
Always a new idea cropping up,
At a spin rate of 25 rps ( 1500 rpm ) of the drone body, the eye can just not keep up.
A stroboscope would be able to stop action the spinning machine.

The fan in my window does the same thing, I cannot see the blades individually, but just a blur and not even much of that, from any angle, even if the 3 blades pass the same sweep area.
Really old and trusted technology from the manufacturer to achieve see-through fan blades.
So one could say that the fan blades have been rendered transparent.

The AI seems to have produced the most ugly configuration, with extra weights added.
The resulting design spread the components around the drone — at different heights and different angles with lots of space in between — to prevent them from visually overlapping when spinning.

Are we sure that there is not a more simpler arrangement? without the weights.
Could it be that the AI is doing the hokey pokey on them, and they 'wisely' accepted.
Wonder what the other 20000 capable of stable flight looked like.

 

[Greg Bernhardt]

We're concerned over privacy implications right? Right?

 

[DaveC426913]

That is just brilliantly evil.

Watch the video - mind-blowing.


Noisy as an angle grinder tho...

I'm Imagining it flying around covertly while yelling at the top of its tiny lungs: "I'M INVISIBLE!!! INVISIBLE SPY DRONE OVER HERE!"

 

[sophiecentaur]

Interesting using the concept of persistence of vision for their drone model.

Having now seen a picture the drone itself I think we're in the realms of a rotating bicycle wheel; its spokes look blurred and objects behind it tend to dominate.

The drone could be useful for some applications but its mass would be dominated by its own working parts so a payload would need to be small and the battery energy would be low.

It would certainly make you jump if one turned up in front of you. A bit like a dragonfly buzzing in your face.

 

[sophiecentaur]

look blurred and objects behind it tend to dominate.

Didya see Predator?

 

[sbrothy]

That has to put a lot of stress and vibration on the components.

Yeah, it's gonna be a while before it can do anything beyond reconnaissance like carry munitions. Though probably shorter than we think. I'm betting this is sugar for DARPA. (if not already payed by by them).

EDIT: BTW, wasn't there something a while back about light being bend around a tank?

 

[sbrothy]

Probably behind paywall (ok, no it seems):

Ray-optics cloaking devices for large objects in incoherent natural light


Macroscopic invisibility cloaking of visible light