Coefficient of Kinetic Friction

AI Thread Summary
To determine the coefficient of kinetic friction for a box sliding down a 30.0-degree ramp with an acceleration of 1.20 m/s², a free body diagram is essential. The forces acting on the box must be analyzed in both the x and y directions to find the normal force and frictional force. The equation μk = fk/Fn can be used, where fk is the kinetic friction force. The problem requires understanding the relationship between mass, normal force, and acceleration to find a solution. A mathematical approach is necessary to derive the coefficient of kinetic friction effectively.
daliberataaa!
Messages
5
Reaction score
0

Homework Statement


A box slides down a 30.0 degree ramp with an acceleration of 1.20 m/s^2. Determine the coefficient of kinetic friction between the box and the ramp.


Homework Equations


μk=f sub k/Fn


The Attempt at a Solution



With the information I have, I have no samples in my physics book or anything. I ohnestly don't know where to start.
 
Physics news on Phys.org
I would start by drawing a free body diagram.

Edit: Fixed spelling
 
Is there a mathematical solution though?
 
What do I need to get to solve this? Do I need mass? Normal force? what?

k well...i have searched the glossary of my book, searched the internet since 3 pm.
 
Last edited:
Yes there is an analytical solution to the problem. Draw the free body diagram and write out the sum of the forces in both the x and y directions.
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

Coefficient of Friction question for a cart going down a wooden ramp
Replies
18
Views
3K
Why is the direction of kinetic/static friction up a ramp?
Replies
7
Views
1K
Box and a Spring on on an inclined plane
Replies
11
Views
3K
How Do You Calculate the Coefficient of Kinetic Friction on a Ramp?
Replies
40
Views
5K
Calculating the coefficient of kinetic friction
Replies
3
Views
4K
A ball climbing a ramp while "rolling the wrong way"
Replies
32
Views
3K
Equation calculations about the coefficient of kinetic friction
Replies
5
Views
3K
Does coefficient of kinetic friction depend on speed?
Replies
16
Views
5K
Finding Force by using the coefficient of friction and mass
Replies
16
Views
3K
Finding the force of kinetic friction without a coefficient
Replies
8
Views
17K

Hot Threads

Recent Insights

Back
Top