Does every object have capacitance?

  • Thread starter Thread starter stingray191
  • Start date Start date
  • Tags Tags
    Capacitance
AI Thread Summary
Every object can have capacitance, which is defined by the equation C=Q/V, where Q is charge and V is potential. While capacitance is commonly associated with two conducting objects, even isolated or non-conductive items can exhibit capacitance, albeit at very small levels. For example, a CRT screen demonstrates capacitance as it can hold an electric field when charged. Environmental factors, such as humidity, can influence how easily static charges dissipate, affecting perceived capacitance. Ultimately, all objects possess some degree of capacitance relative to their surroundings.
stingray191
Messages
6
Reaction score
0
Does every object have a capacitance associated with it? For example, is there a capacitance in a single wire or a chair? If so, can you please explain why because I was taught that capacitance is associated with two conducting objects. Thank you.
 
Physics news on Phys.org
stingray191 said:
Does every object have a capacitance associated with it? For example, is there a capacitance in a single wire or a chair? If so, can you please explain why because I was taught that capacitance is associated with two conducting objects. Thank you.

If an object can be charged then it has capacitance defined by the equation C=Q/V.Here Q is the charge and V the potential.Capacitance is usually associated with two conducting objects in close proximity because the capacitance of isolated objects is extremely small.
 
My understanding is:
capacitance is the ability to hold an electric potential different than the electic potential of objects near it.
In that case, all objects have the potential to have capacitance, they just need to either; a) be non-conductive or b) be electrically issolated from the other object.
Items that are non-conductive (relatively) still bleed charge, just a lot slower, so the difference is noticable.
Take a CRT screen. The electron beam coming from the back charges the screen (glass) makign a noticable field. It feels a little like fur. If a little fabric softner is sprayed on the CRT, that field dissipates.
The same thing happens with cloths.
Humid air can conduct charges easier than dry air. This is the reason you can shock people with static electicity easier in the winter. Heating air reduces its humidity meaning it takes longer for a static charge to dissipate. The discharge when you zap someone is the equalizing of capacitance.

Another way of saying this is:
Capacitance is the measure of how much electrical potential difference an object can hold in reference to another object.
This applies to all objects.

You see capacitance discussed in conductors more often because that is where capacitance causes the most problems. Conductors will induce a charge in another conductor this induced charge can cause problems if not planned for or can be used if planned for.
 
stingray191 said:
Does every object have a capacitance associated with it? For example, is there a capacitance in a single wire or a chair? If so, can you please explain why because I was taught that capacitance is associated with two conducting objects. Thank you.
The capacitance between two concentric conducting shells of radius b and a, b>a, is

C = 4 pi e0 ab/(b-a)

so the capacitance of a 5-cm radius sphere in a 5 meter radius room (with grounded plumbing, wires, etc in the walls) is about 5.5 picofarads. So everything does have some capacitance to something.
Bob S
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top