Does Radio Wave Efficiency Improve During Nighttime Tropospheric Enhancement?

AI Thread Summary
Radio waves do not exhibit changes in efficiency based on the time of day. However, radio signals can be received over greater distances at night due to atmospheric conditions. This phenomenon is related to "Tropospheric Enhancement," which affects signal propagation. The discussion highlights that nighttime conditions can improve signal reception rather than the efficiency of the waves themselves. Understanding these factors is crucial for optimizing radio communication.
xhm100
Messages
2
Reaction score
0
...efficently at night time? :zzz:
 
Science news on Phys.org
xhm100 said:
...efficently at night time? :zzz:

Radio waves do not work more efficiently or less efficiently depending on the time of day. You probably mean "why can radio signals be picked up at greater distances at nighttime than during the day?"
 
See also the section "Tropospheric Enhancement" at

http://home.cogeco.ca/~vem3ont22/propagation/tr-modes.htm
 
Last edited by a moderator:
Thread 'A quartet of epi-illumination methods'
Well, it took almost 20 years (!!!), but I finally obtained a set of epi-phase microscope objectives (Zeiss). The principles of epi-phase contrast is nearly identical to transillumination phase contrast, but the phase ring is a 1/8 wave retarder rather than a 1/4 wave retarder (because with epi-illumination, the light passes through the ring twice). This method was popular only for a very short period of time before epi-DIC (differential interference contrast) became widely available. So...
Hello ! As we know by definition that: "Constructive interference occurs when the phase difference between the waves is an even multiple of π (180°), whereas destructive interference occurs when the difference is an odd multiple of π." But my question is in the case of destructive interference, what happens to the energy carried by the two electromagnetic waves that annihilate, the energy carried by the electromagnetic waves also disappears, or is transformed into some other type of...
I am currently undertaking a research internship where I am modelling the heating of silicon wafers with a 515 nm femtosecond laser. In order to increase the absorption of the laser into the oxide layer on top of the wafer it was suggested we use gold nanoparticles. I was tasked with modelling the optical properties of a 5nm gold nanoparticle, in particular the absorption cross section, using COMSOL Multiphysics. My model seems to be getting correct values for the absorption coefficient and...
Back
Top