Electronics (Circuit Analysis) Questions

Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
2 replies · 2K views
stefan10
Messages
34
Reaction score
0

Homework Statement



Problem A
http://imagizer.imageshack.us/v2/800x600q90/855/6v0c.png

Problem B
http://imagizer.imageshack.us/v2/800x600q90/853/1m2c.png
http://imagizer.imageshack.us/v2/800x600q90/34/wfe4.png

Homework Equations



Kirchhoff's Rules/Ohm's Law

Voltage Divider Formula

[tex]V_{ab} = (V_{0}*R_{2})/(R_{1} + R_{2})[/tex]

The Attempt at a Solution



Problem A:

I'm unsure how much information is sufficient for what the question is asking. I derived these equations, and relations for different currents:

[tex]I_{1} = I_{AB}=I_{EF}[/tex]
[tex]I_{3} = I_{BC}=I_{CD} = I_{DE}[/tex]
[tex]I_{2}=I_{BE}[/tex]

Loop 1 (Clockwise)
[tex]0 = V_{0} - I_{1}R - I_{2}R - I_{1}R = V_{0} - 2I_{1}R - I_{2}R[/tex]

Loop 2 (Clockwise)
[tex]0=V_{0} - 1/2 V_{0} - I_{3}R \ \mbox{(used Voltage Divider Eq for the voltage of GH)}[/tex]
[tex]\Rightarrow 0 = V_{0} - 2I_{3}R[/tex]

Node Equation

[tex]0 = I_{1} - I_{3} - I_{2}[/tex]

Solving these equations I get

[tex]3 I_{1} = I_{3}[/tex]
[tex]I_{2} = -2 I_{1}[/tex]
[tex]I_{3} = - (3/2) I_{2}[/tex]

So for the questions asked:

a.) V_{GH} = V_{0}/2
b.) I_{GH} = V_{0}/2R
c.) I'm not sure how to find this.


Problem B:


V Thevenin is equal to V_{GH} right? That means V_{th} = V_{GH} = V_{0}/2

R Thevenin is R parallel to R, which can be found with 1/R_{th} = 1/R + 1/R which give us R_{th} = 2/R.

I'm not as confident of Problem B as I am of Problem A.
 
Last edited by a moderator:
Physics news on Phys.org
This problem is easiest to solve by using series & parallel combinations of resistors.

For a), collapse the circuit from right to left, combining resistors as you go. You will end up with only one resistor -- this tells you the overall current from the voltage supply. Then re-build the original circuit from left to right, calculating currents and voltages as you go.
 
1. In problem 13, did you get something like V_be = V_o/3 ?
If so, don't you think V_gh = Vo/2 is a little strange ?
I do not understand your 1/2 V_o in loop 2.