Electronics parts complete assortment

AI Thread Summary
Finding a reliable source for electronic parts has proven frustrating for users, with many reporting high prices and extensive search times. There is a specific interest in locating a supplier that caters to laboratory orders, ideally offering a comprehensive assortment of parts at competitive prices. Users are seeking recommendations for websites that can fulfill bulk orders efficiently. The discussion highlights a need for a centralized platform to simplify the purchasing process for electronic components. Overall, the search for an affordable, all-in-one supplier remains a significant challenge.
andrewkg
Messages
86
Reaction score
0
Well I have no where else to look. I have tried various websites stores etc. I have looked into various sources sites extensively. And so far everything is just a source of aggravation. I can find all of the various parts but its over priced and takes to much searching to find parts. I just wanted to know if anyone has a site that does laboratory orders so that I could order all the parts that I will need for a long time. The type of order a lab would make. Within a 4000< the cheaper the better. Thanks!
 
Engineering news on Phys.org

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Crystal Radios and Followups
Replies
37
Views
4K
I Amount of electrons in nuclei
Replies
10
Views
2K
Van de Graaff help
Replies
5
Views
2K
Big Bang Nucleosynthesis; electron-photon ratio
Replies
0
Views
1K
Something is wrong with my simple solder job?
Replies
7
Views
2K
Capacitor Questions (Voltage and Dielectric)
Replies
15
Views
2K
Model electron movement in an electric field (Magic Eye tube)
Replies
2
Views
3K
What are the Alternative Parts for L14F1,LD271 & S20102
Replies
3
Views
2K
Does Electricity Need a Complete Circuit? Exploring Basic Physics Questions
Replies
6
Views
724
Good Site For Opencourseware At Your Own Pace?
Replies
4
Views
1K

Hot Threads

Recent Insights

Back
Top