Hatch/Lid opening help against gravity- references ?

AI Thread Summary
The discussion focuses on finding compact, non-powered mechanisms to assist with the opening and closing of large hatches or lids. Participants suggest using counterweights, springs, and hydraulic systems to reduce the effort required, while emphasizing the need for designs that are not affected by temperature changes. Torsion springs are deemed unsuitable due to their size, and a torque requirement of 300 Nm over a 100-degree range is specified. The idea of using hydraulics to convert rotational motion into linear motion is proposed, but there is a lack of familiarity with hydraulic systems among participants. References to fluid power concepts are suggested for further exploration.
achopra1
Messages
4
Reaction score
0
I am looking for references to systems/designs/mechanisms that can help make the opening/closing efforts of large Hatches/Lids near effortless.
Not looking for powered systems - more like energy storage/release mechanisms. Preferably very compact designs.
Appreciate it if somebody can help point to references or even commercial systems...
 
Engineering news on Phys.org
That's done all the time using counterweights, springs, gas springs, and other devices. Maybe you could be a bit more specific or post a drawing of what you're trying to do.
 
I am looking for spring/counter weight ideas that are extremely compact and not affected by temperature. That cuts out gas springs. The range of motion needs to be about 100 degrees so most simple springs will not work.
 
How about a http://www.engineersedge.com/spring_torsion_calc.htm" ?
 
Last edited by a moderator:
Torsion springs are too big in diameter for large hatches. I am talking about say 300 Nm torque requirement over 100 degree opening
 
Maybe use hydraulics to change the rotation to a translation, and use a traditional linear spring and plunger to store the energy?
 
That sounds interesting. I have not dealt with hydraulic systems. Can you point to some systems that use concepts like these so I can look and learn ?
 
I know almost nothing about hydraulics, sorry. So I'll punt and refer you to wikipedia.org. When I searched on hydraulics at wikipedia, it redirected me to the more general topic of "fluid power":

http://en.wikipedia.org/wiki/Fluid_power
 

Similar threads

Automated tennis ball launcher for my dog
Replies
14
Views
8K
Need help creating articulated costume wings?
Replies
8
Views
5K
I Earth's angular velocity when axis is aligned with apparent gravity
Replies
1
Views
1K
Controlling Water Flow for Sterilization and Filtration in a Gravity-Fed System
Replies
10
Views
2K
Gravity Based Electricity Generator
2
Replies
74
Views
7K
Reference materials to understand methods of solar-powered cooling
Replies
6
Views
3K
Velocity of Fluid flow due to gravity
Replies
6
Views
10K
ABC reference frame synchronous generator modelling in Ltspice
Replies
1
Views
3K
I I need some support, please, for a gravity assist analysis
2
Replies
86
Views
7K
I Can Buoyancy Exchange Occur in a Gravity-Fed Closed Hydraulic System?
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top