I Help with sourcing a specific type of integrating sphere

AI Thread Summary
A user is seeking a specific integrating sphere designed for capturing diffuse reflectance measurements, featuring two ports positioned at equal and opposite angles to eliminate specular reflections. They have struggled to find commercially available options, encountering only general-purpose spheres with different port configurations. Another participant successfully located the desired integrating sphere through Labsphere and shared the link for others interested in this specific design. This highlights the importance of specialized equipment in optical measurements. The discussion emphasizes the need for precise specifications in sourcing scientific instruments.
aferrie
Messages
6
Reaction score
2
I am looking for a specific type of integrating sphere that can be used to capture diffuse reflectance measurements, and I would appreciate help with locating a commercially availably version of this sphere. The diagram below illustrates the type of sphere I am looking for [1]. Two ports are located at equal an opposite angles from the sample normal so that light that is specularly reflected from the sample can be eliminated by a light trap placed in the non-source port.
1700598506496.png

I have looked online in attempt to find a commercially available integrating sphere with this design; however, I have only come across general purpose integrating spheres (such as this Edmund Optics one) that have ports located directly across or 90 degrees from each other. Any help locating this specific type of integrating sphere would be much appreciated.Reference
1. https://www.sciencedirect.com/topics/physics-and-astronomy/spectral-reflectance
 
Science news on Phys.org
Thread 'A quartet of epi-illumination methods'
Well, it took almost 20 years (!!!), but I finally obtained a set of epi-phase microscope objectives (Zeiss). The principles of epi-phase contrast is nearly identical to transillumination phase contrast, but the phase ring is a 1/8 wave retarder rather than a 1/4 wave retarder (because with epi-illumination, the light passes through the ring twice). This method was popular only for a very short period of time before epi-DIC (differential interference contrast) became widely available. So...
I am currently undertaking a research internship where I am modelling the heating of silicon wafers with a 515 nm femtosecond laser. In order to increase the absorption of the laser into the oxide layer on top of the wafer it was suggested we use gold nanoparticles. I was tasked with modelling the optical properties of a 5nm gold nanoparticle, in particular the absorption cross section, using COMSOL Multiphysics. My model seems to be getting correct values for the absorption coefficient and...
Back
Top