Home Depot/ Radio Shack speed of light?

AI Thread Summary
The discussion explores methods to measure the speed of light using materials from Home Depot and Radio Shack. Suggestions include using a mechanical interferometer with a spinning mirror and a prism, as well as setting up standing waves with microwave frequencies. Participants mention the use of oscilloscopes and function generators, questioning the availability of these tools at Radio Shack. Concerns about radiation levels from equipment are also raised, particularly for educational settings. Overall, the conversation focuses on practical DIY approaches to conducting light speed experiments.
bblupton
Messages
3
Reaction score
0
Home Depot/ Radio Shack speed of light?

Is there a way to measure the speed of light, to say 2 significant figures, using things purchased from Radio Shack and Home Depot? I've got a 200' hallway and front surface mirrors. Thanks, Bradshaw
 
Science news on Phys.org
I believe Michelson used a mechanical interferometer (a spinning mirror and a prism) in his test. I'm not sure if this is how he did it, but if you vary the rpm of a spinning mirror, you can sync up the outgoing and incoming pulses of light to measure the time. You won't get any better than 1800s era accuracy, but it its a start...is this for a college project?
 
I recall a lab experiment using a fast oscilloscope, a function generator, and a laser and detector. (Can you get these at Radio Shack?) Try googling: "speed of light" AND oscilloscope .
 
I go to school at a cheap university, we measured the speed of light by setting up standing waves of known microwave frequencies. Google for standing waves.
 
Thanks for the standing waves idea. I have a 60,10,3watt watt generator for the 2m and 70cm ham bands. What is the apparatus and method of observing the standing waves? I wonder if 3 watts is too much radiation for students (and me!) Thanks, Bradshaw K1TE
 
The microwaves in our experiment had a wavelength of about 10cm (this is what is measured in the experiment). The apparatus consisted of a transmitter and a reciever, the distance between which could be varied. Monitoring the voltage in the receiver can tell you when standing wave patterns occur (when the distance between trans and reciever is an integer multiple of wavelength).
 
Thats great! And an edible lab as well! Thanks, Bradshaw
 
Back
Top