How a Photocell Works - Ben's Question

  • Thread starter Thread starter bjohnson
  • Start date Start date
  • Tags Tags
    Works
AI Thread Summary
A photocell operates by using light to knock electrons out of orbit, creating an electron flow that generates current. Initially, as voltage increases, the current rises rapidly due to the increased number of electrons flowing. However, this current eventually flattens out as resistance increases with temperature, indicating a non-linear relationship between voltage and current. Once the voltage reaches a certain threshold, the current begins to rise again as the system overcomes the resistance. Understanding these dynamics is crucial for analyzing the performance of photocells in various applications.
bjohnson
Messages
1
Reaction score
0
I was wondering if anyone is able to tell me how a photocell works and why results for voltage versus current change the way they do. In particular i am looking for why the current increases rapidly at the start as voltages slightly increase, and then a flattening out occurs, i.e. the current doesn't rise much, and finally why the current starts rising again once the voltage gets sufficiently high enough

Thanks in advance :smile:

Ben
 
Physics news on Phys.org
Hi, Ben;
All that I can address is the first part. Photovoltaic cells work because if a proper material is exposed to light, the photons knock electrons out of orbit and a chain reaction of sorts takes place to set up an electron 'flow'. I've never heard of those other stages that you mentioned. Sorry for the limited response, but that's the best that I can do right now.
 
Hello! I have no idea here, I've just finished A-Levels, so I don't know a great deal about Physics at the mo, but I think I did some work experience on photocells...

Just quoting Danger, but when the photons knock electrons out of orbit and they make a current, isn't it just a case of, when you have more electrons flowing, therefore a larger current you have a higher temperature, so a higher resistance - meaning the resistance isn't constant, so the graph is curved as it isn't an ohmic conductor...? Just thinking out loud really!

Sam
 
I have recently been really interested in the derivation of Hamiltons Principle. On my research I found that with the term ##m \cdot \frac{d}{dt} (\frac{dr}{dt} \cdot \delta r) = 0## (1) one may derivate ##\delta \int (T - V) dt = 0## (2). The derivation itself I understood quiet good, but what I don't understand is where the equation (1) came from, because in my research it was just given and not derived from anywhere. Does anybody know where (1) comes from or why from it the...
Back
Top