How can we reduce VOC emissions from painting boats

Thread starter miru
Start date Aug 9, 2016
Tags

Emissions

AI Thread Summary

Reducing VOC emissions from boat painting can be challenging, especially with 2-stage urethane paints that require low viscosity for effective spraying. Many modern paints are already formulated to minimize VOC levels. Using high-efficiency low-volume high-pressure (HPLV) guns can help, but they often necessitate thinning with lacquer thinner, which increases VOCs. Exploring alternative formulations or application methods may provide additional solutions. Effective strategies are essential for maintaining environmental standards while ensuring quality finishes.

Aug 9, 2016

miru

I am interested in measures to reduce VOC levels in paint on boats in its outdoor or enclosed space

Engineering news on Phys.org

Aug 9, 2016

miru

I looking for help

Aug 9, 2016

Kevin McHugh

Are you spraying gel coat? Most paints have been already formulated to reduce VOCs. When spraying 2-stage urethane, it is difficult to reduce VOCs because the HPLV guns require low viscosity, i.e. the mixture is reduced with lacquer thinner.

Thread 'How could I make it so ferrofluid drops do not coalesce?'

Hello! I've been brainstorming on how to prevent a lot of ferrofluid droplets that are in the same container. This is for an art idea that I have (I absolutely love it when science and art come together) where I want it to look like a murmuration of starlings. Here's a link of what they look like: How could I make this happen? The only way I can think of to achieve the desired effect is to have varying droplet sizes of ferrofluid suspended in a clear viscous liquid. Im hoping for the...

View full post »

Thread 'How do you fabricate microfluidic chips in your lab?'

Hello everyone! I am curious to learn how laboratories handle in-house chip manufacturing using soft lithography for microfluidics research. In the lab where I worked, only the mask for lithography was made by an external company, whereas the mold and chip fabrication were carried out by us. The process of making PDMS chips required around 30 min–1 h of manual work between prepolymer casting, punching/cutting, and plasma bonding. However, the total time required to make them was around 4...

View full post »