How Does Air Pressure Affect Fluid Levels in a U-Shaped Tube?

AI Thread Summary
The discussion revolves around the effects of air pressure on fluid levels in a U-shaped tube filled with water and oil. The user attempts to derive the velocity of air above the open end of the tube using pressure equations and Bernoulli's principle. Key equations relate the pressures at the bottom of the oil column and the air flow, indicating that the velocity of air can be calculated based on the difference in densities and the height of the fluid columns. Clarifications are sought regarding the meaning of air pressure (P(air)) and the need for specific values like the density of oil and the size of the oil column. The user is looking for validation of their calculations and a diagram to aid understanding.
faradayscat
Messages
57
Reaction score
8

Homework Statement

[/B]
Suppose we have a u-shaped tube filled with water, with oil added at one end which disturbs the equilibrium. Now say one end is blocked off and the other is exposed to air flow which reduces the pressure above the water and causes the water to climb back to equilibrium with the top of the oil. What would be the velocity of the wind above the open end?

Homework Equations

The Attempt at a Solution


If the column of oil has a length 'L', then the pressures at the bottom level of the oil are the same:

P1watergL = PairoilgL
P1 = Pair + gL(ρoilwater) (1)

Where P1 is the pressure due to the air flow
Using Bernoulli's equation at the top of the tube as the reference point yields:

P1+0.5ρairvair2 = Pair (2)

Substituting equation (1) into (2) gives

0.5ρairvair2=gL(ρfluidoil)

And then the velocity of air can be found... Is my work good? Thanks!
 
Physics news on Phys.org
What does P(air) exactly stand for?
 
I would think we'd have to know the size of the column of oil ...

... and the density of the oil while you're at it ...
 
Replusz said:
What does P(air) exactly stand for?
The air pressure
 
rude man said:
I would think we'd have to know the size of the column of oil ...

... and the density of the oil while you're at it ...

It has length 'L' and density ρoil

I'm not asking for a specific solution, just wanted to see if my work checks out.
 
Can you please provide a diagram?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top