How electric field lines going out from surface is zero?

4 replies · 2K views · last reply
gracy
Messages
2,486
Reaction score
83

in the video above the instructor explains from time 8:22 to 8:55 that how and why electric field lines going out from the surface which do not enclose charge is zero but I don't understand then why not electric field lines going out from the spherical surface ( enclosing charge) is zero.Because by applying what the instructor said in this case also ,electric field lines going out comes out to be zero.

Hand-drawn diagram of a closed ellipse with black arrows pointing inward at its boundary and blue arrows pointing outward from it, with a dot at the centre; key reads black arrow = coming inside the surface, blue arrow = going outside.
 
Here is the correct way to determine whether an electric field line at a particular point ##\mathbf{r}## is considered to be "going out" or "going in":
- if ##\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a} > 0##, the electric field line at this point is leaving the closed surface
- if ##\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a} < 0##, the electric field line at this point is going inside the closed surface
- if ##\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a} = 0##, the electric field line at this point grazes the surface, it doesn't count in the flux traversing the surface
The surface element ##d\mathbf{a}## is by convention taken to be directed outward from the closed surface.
In your picture, it's obvious that the quantity ##\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a}## is positive at all points in the spherical surface.
 
  • Like
Likes   Reactions: gracy
But applying what you said
Hand-drawn diagram of a point charge q at left, with an arrow labelled electric field vector pointing right toward a curved open surface, and an arrow labelled area vector pointing outward from its edge.

blue_leaf77 said:
if E(r)⋅da=0\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a} = 0, the electric field line at this point grazes the surface, it doesn't count in the flux traversing the surface
but it should be leaving the closed surface
blue_leaf77 said:
if E(r)⋅da>0\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a} > 0, the electric field line at this point is leaving the closed surface
so
blue_leaf77 said:
if E(r)⋅da>0
but in my case it is
blue_leaf77 said:
E(r)⋅da=0
 
gracy said:
but it should be leaving the closed surface
At that exact point where ##\mathbf{E}(\mathbf{r}) \cdot d\mathbf{a} = 0##, the line does not leave nor enter the surface. If you keep tracing this line you may find it enter or leave the surface at another point.
gracy said:
but in my case it is
Are you referring to your last picture, with ##d\mathbf{a}## denoted by that area vector to the right? That vector looks almost parallel with the electric field line at the same point, doesn't it? E(r)⋅da=0 cannot be zero then.
 
Last edited:
  • Like
Likes   Reactions: gracy
I Understand now.Thanks a lot.Really really helpful.