How to Connect a PV Module with the Grid?

  • Thread starter Thread starter mukesh.sehwag
  • Start date Start date
  • Tags Tags
    Grid module
AI Thread Summary
To connect a photovoltaic (PV) module to the grid, it is essential to research existing circuit diagrams and guidelines, particularly focusing on "grid tie inverter schematic circuit diagrams." Regulatory compliance is crucial, as electricity suppliers have strict health and safety standards that must be met before approval for connection. Users are encouraged to conduct thorough research to understand the requirements and processes involved. If further technical questions arise during this process, they can seek assistance in forums. Proper preparation and adherence to regulations are key to successfully connecting a PV system to the grid.
mukesh.sehwag
Messages
2
Reaction score
0
I am working on a project. I have completed designing PV module in simulink. I have also added MPPT algorithm and Boost Converter. Now I want to connect it with a grid. Can anybody tell me the circuit diagram?
 
Engineering news on Phys.org
mukesh.sehwag, Welcome to Physics Forums!

Using Google Search with the terms "connected photovoltaic module with grid" I found many articles describing how to do this. Why don't you investigate how thousands of others have successfully made this interface?

If you do this research and still have any technical questions or doubts, then return here and post them.

Bobbywhy
 
Reply :

Thanks for replying.

I did search before posting here. But what I got are all statistics showing how much produced and like that. Okay I am still searching. If I have any problem I will reply back.
 
OK, mukesh.sehwag. Will you please try to Google search using these terms: "grid tie inverter schematic circuit diagrams". See if what you need can be found there.

Bobbywhy
 
If this is a practical project and if you really want to connect to the grid then you will need to read the regulations that you will need to satisfy before your connection is 'approved' by your supplier. Electricity suppliers are obsessed with Health and Safety (rightly so) and will not let anyone connect a PV system that is not thoroughly checked out (and probably type-approved).
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top