Is Hanging Buried Jelly Filled Cable Overhead on an Electric Pole Safe?

  • Thread starter Thread starter JDWOLF
  • Start date Start date
  • Tags Tags
    Group
AI Thread Summary
Hanging buried jelly-filled cable overhead on an electric pole raises safety concerns, particularly regarding grounding and static charges. The installation is reportedly causing low voltage spikes that disrupt equipment during adverse weather conditions. The company responsible for the installation claims that the cable can be used overhead or underground, which is disputed by the telecommunications engineer seeking advice. Compliance with the National Electrical Code (NEC) is essential, as violations may require modifications or removal of the installation. Consulting local building inspectors may provide further guidance on the matter.
JDWOLF
Messages
1
Reaction score
0
Hello,
My name is Jim and I found this forum through yahoo search engine. I am a Telecommunications engineer and I have a bit of a problem. I am 99% sure I am right on this but wanted to ask some experts please.

I have a customer who decided to go a cheapr route and have buried jelly filled cable ran overhead outside using an electrical pole (50k servicing a hospital and surrounding offices, homes etc etc)

The "buried jelly filled" hung cable is not grounded on the pole and we are suffering static charges/ low voltage spikes that is taking equipment out whenever bad weather or high winds occur.

The company who hung the cable stated the buried could be in ground or overhead, didn't matter? I am leaning to disagreeing with them as I put a stop point between the cable and the phone switch. When the customer "pulls the plug" on the cable they have suffered no interuption of service.

I have been looking for a document that explains the "why you don't hang buried-jelly filled cable overhead on a electric pole with that much power running through it.

Thank you for taking the time to read this and any help is so truly appreciated.
Jim
 
Engineering news on Phys.org
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
Back
Top