Is it watt per second or watt per hour

  • Thread starter Thread starter bionic6manuel
  • Start date Start date
  • Tags Tags
    Per Watt
AI Thread Summary
A thermoelectric generator rated at 4 watts produces 4 joules of energy every second, as watts measure power (joules per second). The discussion clarifies that it is incorrect to refer to watts as "per hour" or "per second" since the unit already incorporates time. The confusion may arise from the term watt-hours (Wh), which measures total energy generated over time. If the device runs for one hour, it generates 4 watt-hours, equating to 14,400 joules. Overall, watts indicate the rate of energy generation, not a cumulative measure over time.
bionic6manuel
Messages
14
Reaction score
0
Say I have a device (Thermoelectric generator) that "generates power" at 4 watts, as per watt meter reading, is it producing 4 watts a second or 4 watts an hour. I say it is producing 4 watts a second but my brother in law says 4 watts an hour so the watt meter can tell the future. Please bear in mind I am not consuming energy but generating energy.
 
Physics news on Phys.org
Hello .Watts is a unit of power(Joules per second) so the 4 Watt device is producing 4 Joules per second.

To clarify this further the Joule is a unit of energy so the device is producing 4 Joules of energy every second.
 
Last edited:
Watts are a unit of power, so it doesn't make sense to talk about watts per hour (or per second). They already have the "per unit time" built in.
 
bionic6manuel said:
... is it producing 4 watts a second or 4 watts an hour ...

It is generating 4 Watts for as long as you leave it on. :rolleyes:

See Dadface's answer above. Power is a measure of how fast you generate energy (or consume it). Joules is a measure of total generated energy.

Your brother may be getting confused by the units WHr which is also a measure of energy (that's Watt hours, not Watts per hour). If you leave a 4 W device running for one hour, you generate 4 WHr of energy, which is 4 JHr/s x 3600 sec / 1 Hr, which is 14400 Joules.
 
I thank you all very much for the explanation
 
cjl said:
Watts are a unit of power, so it doesn't make sense to talk about watts per hour (or per second). They already have the "per unit time" built in.

Watts per time is the change in power over time :)
 
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (Second part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8. I want to understand some issues more correctly. It's a little bit difficult to understand now. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. In the page 196, in the first paragraph, the author argues as follows ...
Thread 'Inducing EMF Through a Coil: Understanding Flux'
Thank you for reading my post. I can understand why a change in magnetic flux through a conducting surface would induce an emf, but how does this work when inducing an emf through a coil? How does the flux through the empty space between the wires have an effect on the electrons in the wire itself? In the image below is a coil with a magnetic field going through the space between the wires but not necessarily through the wires themselves. Thank you.
Back
Top