Is This the Most Powerful 4-Inch Pulsejet Engine Ever Made?

  • Thread starter Thread starter ganuganu
  • Start date Start date
AI Thread Summary
A user known as "the pulsejet guy" has successfully created a fifth pulsejet engine, a highly tuned 4-inch model that produces more thrust than previous designs. After initial starting failures, modifications to the tailpipe allowed the engine to run successfully. The new engine generates significant noise and vibrations, which can be irritating, necessitating caution for nearby listeners. It produces a thrust of 14 pounds, and the creator has not informed neighbors about the experiments to avoid potential objections. A video showcasing the engine's performance has been shared for further viewing.
ganuganu
Messages
23
Reaction score
0
hello everybody,i think you all remember me "the pulsejet guy" atlast made my fifth successful pulsejet engine after doing some research on the design.

so you all remember that i made this engine before..

http://gallery.myff.org/gallery/1109952/21062011199.jpg

the above engine is a 4 inch dia engine,so now with the same dia i made a highly tuned chinese type which produces more thrust when compared to the previous design..At first i failed at starting then i made some changes in the tailpipe and got it running successfully..

here is the engine.

http://gallery.myff.org/gallery/1109955/23072011291.jpg

And the sound produced in this engine is comparably high its annoying annoying irritating ear bleeding and produces high vibrations..so should be little careful wit your ears..

and finally here is the video take a look at it..see you all in next pulsejet video,a bigger one..

http://www.youtube.com/watch?v=0_5I752xBeg&feature=channel_video_title
 
Engineering news on Phys.org
Nice. How much force? Don't your neighbors get upset?
 
Unrest said:
Nice. How much force? Don't your neighbors get upset?

i didnt inform my neighbours,if i say them,they won't allow me to do these experiments..And the thrust produced is 14 pounds..
 
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
After over 25 years of engineering, designing and analyzing bolted joints, I just learned this little fact. According to ASME B1.2, Gages and Gaging for Unified Inch Screw Threads: "The no-go gage should not pass over more than three complete turns when inserted into the internal thread of the product. " 3 turns seems like way to much. I have some really critical nuts that are of standard geometry (5/8"-11 UNC 3B) and have about 4.5 threads when you account for the chamfers on either...
Back
Top