Is Work and Energy the Same Thing?

  • Thread starter Thread starter DB
  • Start date Start date
  • Tags Tags
    Formula
AI Thread Summary
The calculation for translational kinetic energy (KE) is confirmed as correct, with the formula KE = 1/2 x Mass x Velocity^2 yielding a result of 31,250 Joules for a 25 kg object traveling at 50 m/s. It's emphasized that including units is crucial for meaningful results. In SI units, kinetic energy is measured in Joules, which are also used for work. The discussion clarifies that work and energy are fundamentally the same, differing only in their context. Understanding these concepts is essential for accurate physics calculations.
DB
Messages
501
Reaction score
0
Translational Kinetic Energy
KE= 1/2 x Mass x Velocity^2 ?

So if an object with a mass of 25 kg was traveling at 50 m/s it would have KE: 31250 ? [1/2 x 25 x (50^2)]= 31250

Is this right?

Ty
 
Physics news on Phys.org
That is correct. But don't forget the units of the answer,,otherwise it has no meaning.
 
lol thanks, what is the unit of kinectic energy ? lol
 
In the system of units of your problem (SI units), energy is measured in Joules.
 
Ah didn't know that, i thought joules were just work or energy not kinectic mechanical or potential, thanks
 
Work and energy are identical. One is just the sum of the other, between specified limits.
 
Thread 'Gauss' law seems to imply instantaneous electric field propagation'
Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
Thread 'A scenario of non-uniform circular motion'
(All the needed diagrams are posted below) My friend came up with the following scenario. Imagine a fixed point and a perfectly rigid rod of a certain length extending radially outwards from this fixed point(it is attached to the fixed point). To the free end of the fixed rod, an object is present and it is capable of changing it's speed(by thruster say or any convenient method. And ignore any resistance). It starts with a certain speed but say it's speed continuously increases as it goes...
Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...

Similar threads

Replies
16
Views
1K
Replies
59
Views
4K
Replies
7
Views
1K
Replies
138
Views
8K
Replies
7
Views
2K
Replies
11
Views
2K
Back
Top