Maglev Train by 10 kilometer Permanent magnets

Thread starter ze-ro
Start date Jul 20, 2008
Tags

Maglev Magnets permanent magnets Train

AI Thread Summary

Building a long permanent magnet for a Maglev train system is technically feasible. The concept involves using a series of permanent magnets arranged to create a magnetic field that can support and propel the train. Advances in materials and engineering could enable the construction of a 10-kilometer-long permanent magnet track. However, practical challenges such as cost, maintenance, and magnetic field uniformity must be addressed. Overall, the idea presents an innovative approach to Maglev technology.

Jul 20, 2008

ze-ro

I want know that can we build a long Permanent magnet for a Maglev way ?

Please say that its possible ?

(i attached one picture , with that you can understand that what is my question and what is a long Maglev way by a Permanent magnet)

Engineering news on Phys.org

Jul 20, 2008

ze-ro

http://en.wikipedia.org/wiki/Maglev_train#Existing_maglev_systems

Jul 21, 2008

ze-ro

we can build that long magnet?

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...

View full post »

Thread 'Question about the voltage between two charged capacitors'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...

View full post »

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...

View full post »