Pressure generated by a force on a pump with a lever

2 replies · 2K views · last reply
BiostudentWouter
Messages
2
Reaction score
0
Homework Statement
Find the force in point D, both Dx and Dy
Relevant Equations
Sum of forces = 0, sum of moment= 0
Handwritten free-body diagram of a rigid bar pinned at points B and D, with a 800 N force at 60 degrees, a 0.6 m and 0.8 m offset, and separate sketches of joint forces Ax, Ay, Bx, By, Dx, Dy, with equilibrium equations written beside it.
 
Attachments
  • Free-body diagram of a lever system: a rod labelled E with force F = 800 N applied at its left end, a 1.2 m length to pivot B, 0.4 m to point D, angles 75° and 30°, pivot support at A, and a block labelled C at the right.
    mecc.png
    4.8 KB · Views: 248
Last edited by a moderator:
Images are for textbook extracts and diagrams. Please don't post handwritten text as images; they can be hard to read and the reader cannot cut and paste to make comments.
You have a sign error in the third equation in the top right group. Also, I couldn't read some of it. Looks like ##-6yz,\delta z##.

You need a moments equation for the short spar.
 
BiostudentWouter said:
Homework Statement:: Find the force in point D, both Dx and Dy
...
What would you like to be helped with in this problem?

Since there is resistance to compression from the fluid in cavity C, you can consider D to be an anchor to ground in order to determine instantaneous forces and torques for that particular geometry of the mechanism.

Note that the angle of 75° formed between both levers is key in calculating Dx.
 
Last edited: