How Does a Wire Grid Polarizer Work?

  • Thread starter Thread starter semc
  • Start date Start date
  • Tags Tags
    Polarizer
semc
Messages
364
Reaction score
5
This is not really a homework but I would like to confirm my understanding on the principle of a wire grid polarizer. For the polarizer to filter the polarization of EM wave, waves with e field parallel to the grid will cause the electron to oscillate in the same direction so the wave is reflected while another wave with orthogonal e field will pass through.

Is this explanation correct? If so, why does the electron movement reflect the incident wave and not radiate the wave and allows it to pass through the polarizer?
 
Physics news on Phys.org
Your explanation is correct.

As to why it reflects, consider that in the direction parallel to the E field, it behaves exactly like a an ordinary metallic surface behaves. Then the question is reduced to "why do metals reflect". Can you answer this question?
 
I have no idea why metals reflect. I always thought that at the interface you have to use the continuity condition to describe the parallel and perpendicular components of the E field.
 
The basic (classical) idea of metallic reflection is that free electrons oscillate with the frequency of incident light.

The theory works well up to the infrared frequencies. For more information, here are some keywords: Drude model; Hagen-Rubens relation.
 
  • Like
Likes 1 person
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top